Owner manual

FP-2500/FP-2600 Series User Manual
4-3
4.2 Screen Display Adjustment
CONTRAST Adjusts the contrast.
(Analog RGB only)
*1
BLACK LEVEL Adjusts the color brightness.
(Analog RGB only)
*1
H-POS
V-POS
(Analog RGB only)
*1
(Analog RGB only)
*1
BACKLIGHT
(Analog RGB only)
*1
DISPLAY MODE
OSD CLEAR (RESET)
OSD SAVE
SYSTEM
ESCAPE
Cancels the setting and returns to the upper level. In the main
menu, this command closes the OSD.
Save the current value and quit the OSD.
Changes settings such as activating the click sound.
Resets the current OSD value to the default value.
Automatically adjusts the contrast and the brightness.
PHASE
Displays the resolution of the input image data.
AUTO GAIN CONTROL
Item Function
Adjusts the backlight brightness. (9 levels)
Adjusts the input signal and the dot clock position. (32 levels)
Adjusts the vertical position of the screen.
Adjusts the horizontal position of the screen.
H-SIZE
Adjusts the screen size in the horizontal direction.
*1 When using DVI-D, the message "DO NOT NEED SETUP FOR DVI-D" is displayed
and no settings are required.
 Quitting the OSD
To quit the OSD, press the button in the main menu or leave the OSD as it is for at
least 30 seconds. If the OSD is automatically closed after 30 seconds of inactivity, the
values set before the OSD was closed will be applied.
4.2.2 OSD Setting Icons