Owner manual

FP-2500/FP-2600 Series User Manual

7-3

7.2 Periodic Check Points

• The gasket must be inserted correctly into the groove for the FP unit’s

moisture resistance to be equivalent to IP65f.

• Be sure the gasket's seam is not inserted into any of the unit's cor-

ners, only in the straight sections of the groove. Inserting it into a

corner may lead to its eventually tearing.

• The upper surface of the gasket should protrude approximately 2mm

out from the groove. Be sure to check that the gasket is correctly in-

serted before installing the FP into a panel.

To keep your FP unit in its best condition, please inspect the following points periodi-

cally.

FP Operation Environment

• Is the ambient temperature within the allowable range (0

C to 50

C )?

• Is the ambient humidity within the specified range (30%RH to 90%RH, dry

bulb temperature of 39

C or less)?

• Is the operating atmosphere free of corrosive gasses?

Electrical Specifications

• Is the Rated Voltage Range appropriate ?