Datasheet

ManualsBrandsPROFAN TECHNOLOGY ManualsIC FansAxial fan 230 Vac 338 m³/h (L x W x H) 172 x 150 x 51 mm P2175HBT

Date:2015.11.10

SPECIFICATION FOR APPROVAL

CUSTOMERS:

DESCRIPTION: Axial AC Fan

DIMENSIONS: 172x150x51mm

M O D E L: P2175HBT

824

台灣高雄縣燕巢鄉安招村安南二路 50 巷 30 號

NO.30 Lane50,2nd Rd.,Yanchao ship town,

Kaohsiung Hsien, Taiwan

TEL:(07)6163604 FAX:(07)6169601

Email: sales@profantec.com.tw

維弘科技股份有限公司

PROFAN

TECHNOLOGY

CORP.

Summary of content (5 pages)

PAGE 1
維弘科技股份有限公司 PROFAN TECHNOLOGY CORP. Date:2015.11.10 SPECIFICATION FOR APPROVAL CUSTOMERS: DESCRIPTION: Axial AC Fan DIMENSIONS: 172x150x51mm M O D E L: P2175HBT 824 台灣高雄縣燕巢鄉安招村安南二路 50 巷 30 號 NO.30 Lane50,2nd Rd.,Yanchao ship town, Kaohsiung Hsien, Taiwan TEL:(07)6163604 Email: sales@profantec.com.
PAGE 2
Axial AC FAN MODEL: P2175HBT CHARACTERISTICS 1. Motor Design : Reliable capacity-run Motor 2. Insulation Resistance : 500Megohms minimum at 500 VDC 3. Dielectric Strength : 1500 VAC for one minute 4. Motor Protection : Thermal Protected & Class A 5. Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with microphone at a distance of one meter from the fan intake. 6. Air Performance : Measured by a double chamber.
PAGE 3
SPECIFICATIONS Model: P2175HBT 1. Rated Voltage : 230VAC 50/60Hz 2. Operating Voltage Range : 210~250VAC 3. Starting Voltage : 150VAC 4. Rated Speed(5%) : 2800/3200 rpm 5. Airflow : 338/398 m³/h 6. Static Pressure : 0.65/0.76 in-H2O 7. Rated Current : 0.12 A 8. Power : 25/27 W 9. Noise : 51/58 dB 10. Direction of Rotation : clockwise viewed front fan blade 11. Connect : Terminals (3±0.1mm 2 pin 110 male terminal) 12. Operating Temperature : -10 to +70Deg.C 13.
PAGE 4
PERFORMANCE 50/60Hz MATERIAL 1. Frame 2.
PAGE 5
Notes 1. The suitability of the motor for use when exposed to water, oil, and chemicals, x-rays ,ultraviolet rays and the like have not been determined. 2. Plastic fan have been proved that don’t suit to use UV environment, but steel fan could. 3. The acceptability of the motor leads and terminal assembly should be determined for each application with regard to wire size, temperature limitation and other particular aspects which might be required in the end product. 4.