Datasheet

ManualsBrandsPROFAN TECHNOLOGY ManualsIC FansAxial fan 230 Vac 458 m³/h (L x W x H) 176 x 176 x 89 mm P2189HBL

Date:2016.2.16

SPECIFICATION FOR APPROVAL

DESCRIPTION: Axial AC Fan

DIMENSIONS: 176x176x89mm

M O D E L: P2189HBL

824

台灣高雄縣燕巢鄉安招村安南二路 50 巷 30 號

NO.30 Lane50,2nd Rd.,Yanchao ship town,

Kaohsiung Hsien, Taiwan

TEL:(07)6163604 FAX:(07)6169601

Email: sales@profantec.com.tw

維弘科技股份有限公司

PROFAN TECHNOLOGY CORP.

Summary of content (5 pages)

PAGE 1
維弘科技股份有限公司 PROFAN TECHNOLOGY CORP. Date:2016.2.16 SPECIFICATION FOR APPROVAL DESCRIPTION: Axial AC Fan DIMENSIONS: 176x176x89mm M O D E L: P2189HBL 824 台灣高雄縣燕巢鄉安招村安南二路 50 巷 30 號 NO.30 Lane50,2nd Rd.,Yanchao ship town, Kaohsiung Hsien, Taiwan TEL:(07)6163604 Email: sales@profantec.com.
PAGE 2
Axial AC FAN MODEL: P2189HBL CHARACTERISTICS 1. Motor Design : Reliable Capacitor Motor Construction 2. Insulation Resistance : 500Megohms minimum at 500 VDC 3. Dielectric Strength : 1500 VAC for one minute 4. Motor Protection : Thermal Protected 110℃ 5. Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with microphone at a distance of one meter from the fan intake. 6. Air Performance : Measured by a double chamber.
PAGE 3
SPECIFICATIONS Model: P2189HBL 1. Rated Voltage : 230VAC 2. Operating Voltage Range : 180~250VAC 3. Starting Voltage : 150VAC 4. Rated Speed(5%) : 2850/3350 rpm 5. Airflow : 458/534 m³/h 6. Static Pressure : 0.7/0.85 in-H2O 7. Rated Current : 0.11/0.16 A 8. Power : 25/34 W 9. Noise : 63/67 dB 10. Direction of Rotation : Counter-clockwise viewed front fan blade 11. Connect : Line 31015mm 12. Operating Temperature : -10 to +70Deg.C 13. Bearing System : Ball System 14.
PAGE 4
PERFORMANCE 50/60Hz MATERIAL 1. Frame 2.
PAGE 5
Notes 1. The suitability of the motor for use when exposed to water, oil, and chemicals, x-rays ,ultraviolet rays and the like have not been determined. 2. Plastic fan have been proved that don’t suit to use UV environment, but steel fan could. 3. The acceptability of the motor leads and terminal assembly should be determined for each application with regard to wire size, temperature limitation and other particular aspects which might be required in the end product. 4.