- CEM GLobal Beverage Dispenser User Manual

Specication
Voltage, Frequency, Phase AC~115V/60Hz/1PH
Electrical Rating 0.85A
Color Black/Argentine
Capacity 23 Liters/Max. 8 Wine bottle
Adjustable Lowest Temp 43 Fahrenheit
Net Weight(Approx.) 8Kg
Dimensions(W*D*H)
Installation Instruction
1. Set the unit on a at, solid surface with enough space in front to let the
door be opened easily.
2. Leave enough space around the unit. Do not place or install this unit in
area where the ventilation or circulation ducts may become blocked. Make
sure there are at least 6’’/15 cm of space between the back of the unit and
the wall. Keep a minimum distance of 4”/10 cm on each side of your unit
free.
Note: Don’t put the heavy weight on the unit, it will scratch the surface of
the unit and damage it.
Don’t put the unit in the place with direct sunlight or having another hot
source nearby, it will affect the cooling speed of the unit.
3. Plug the unit into a properly grounded, 115 V electrical outlet.
Now the unit is waiting to run.
Operation
Storing wine bottle
The unit has two racks inside the cooling compartment. Each rack permit
you place 4 wine bottles, so it can totally contain 8 wine bottles inside.
When putting the wine bottle inside, let the lid of the bottle face out to
take it easily. And don’t place or operate it roughly. And put the wine bottle
inside as possible to avoid the glass contact with the lid of the bottle.
After this, close the door properly.
Using the product
1. After putting the wine bottle inside the unit and plugging the power supply
plug, then you can start the unit to run.
2. Press the On/Off button on the control panel.
3. Press Setting Temperature Decreasing Button or Setting Temperature
Increasing Button to your desired temperature.
4. Let the unit run continuously.
Especicaciones
Voltaje, Frecuencia, Fase AC 115V / 60Hz /1PH
Resistencia eléctrica 0.85A
Color Negro / Plateado
Capacidad 23 litros / Máx. 8 botellas de vino
Temperatura 43°F
Peso neto aproximado 8Kg.
Dimensiones (AxFxA)
Instrucciones de instalación
1. Coloque el equipo sobre una supercie plana y sólida con suciente
espacio en la parte delantera para permitir la apertura de la puerta.
2. Deje suciente espacio alrededor del aparato. No coloque ni instale el
equipo en una zona donde las vías de ventilación y circulación se vean
obstruidas. Asegúrese de que exista por lo menos 6” / 15cm de espacio
entre la parte posterior del equipo y la pared. Mantenga libre una distancia
mínima de 4” / 10cm en las partes laterales del electrodoméstico.
Nota: No coloque objetos pesados sobre el equipo ya que esto puede
arañar la supercie o dañarlo.
No coloque el electrodoméstico en un lugar donde quede expuesto
a la luz solar directa o cerca de alguna otra fuente de calor ya que
esto puede afectar la velocidad de enfriamiento del equipo.
3. El equipo debe contar con la adecuada conexión a tierra. Utilice un
tomacorriente de 115V.
Ahora el equipo está listo para utilizarse.
Funcionamiento
Almacenamiento de las botellas de vino
El electrodoméstico cuenta con dos rejillas en el compartimiento de en-
friamiento. Cada rejilla le permite colocar cuatro botellas de vino, de tal
Pantalla
de temperatura
Botón para
disminuir la
temperatura
Botón para
aumentar la
temperatura
Botón de
encendido