Specifications

11
The Mjr Mixer can also be used to send audio signals to Betacams via wireless
transmitters. The use of transmitters is normally accomplished by connecting the
Mjr’s 10 pin output connector to the audio input of the specific transmitter. It is
important to note that transmitter placement greatly affects transmit range and
clarity. For best results, transmitters should be mounted away from the mixers
surface allowing un-impeaded RF radiation.
D. SPECIAL NOTES
The outputs of the Mjr Mixer are electronically balanced and are designed
to drive balanced inputs (loads). To drive unbalanced loads, you should
use only the “Hi” output pin of the mutli-pin connector and the ground pin.
Do not tie the “Low” output pins to ground as you would with other pieces
of equipment. Doing so will not harm the mixer, but it will increase current
consumption, thus shortening you battery life.
WARRANTY AND NON-WARRANTY SERVICE
In the unlikely event your Mjr Mixer requires service it should be carefully packed
and shipped prepaid to:
Professional Sound Corporation
Service Department
28085 Smyth Drive
Valencia, CA 91355 USA
PH 661-295-9395
FAX [phone]
e-mail [e-mail]
Please call before shipping your mixer. We may be able to solve your problem
via the phone. Many products have been shipped in to us for service with
incorrect switch settings. We are always willing to help you with your Mjr Mixer
questions.
WARRANTY:
Complete details of the PSC Mjr Mixer warranty are given on the enclosed blue
warranty registration card. If you did not receive one, please contact your local
dealer or call us directly.