Instructions

ManualsBrandsProfi Power ManualsCar Battery Charging & CareProfi Power Quick start system Mini Jump JPR2600 Jump start current (12 V)=234 A

Handling the Unit

1 jumper cable connector

2 Function Control

3 battery charged green

4 battery - Pliers

5 USB output

6 Power on / oﬀ switch

7 start switch

8 side lighting

9 Warning Blinker

Read this manual before using the device, very carefully and keep it in order once

needed even for disclosure to third parties, at any time for future reference.

Charge 12 hours before ﬁ rst use. For 12V systems only, except JPR 4500

6V for

6V-board systems.

Table of Contents

1 General Safety

2 Scope of delivery

3 Intended use

4 Features, Functionality

5 Connection / Operation of the jumper device

6 Care and cleaning of the unit

7 Troubleshooting

8 Warranty

9 Disposal

10 Speciﬁ cations

11 Conformity

Please observe the following safety instructions.

1 General Safety - IMPORTANT -

The axhess GmbH & Co.KG, Industriestrasse 11, D-56598 Rheinbrohl, Germany, is not liable for damage or

consequential damage caused due to non-observance of this manual. To property or personal injury and

caused by not following the instructions or improper use of the device, we assume no liability. In such

cases, the warranty becomes void. Particularly the unauthorized intervention, alteration or modiﬁ cation

of the device or its accessories, is expressly not permitted. The device must only be charged with the sup-

plied charger or 12V charging cable.

The warranty is void if:

- Equipment damage due to mechanical inﬂ uences and / or overvoltage.

- Any change to the connecting cables, output cables and other accessories.

- Use for others, as described in the instructions purposes.

- Fluid action and / or appropriate storage instructions.

- Consequential damages due to the improper use and / or defective Batteries may arise.

Operate the device only as intended according to its use.

Make sure that when you are dealing with the product is not crushed the charging and booster cables or

damaged by sharp edges.

Always place and use the jump start unit in the vicinity of combustible or ﬂ ammable materials, or hazar-

dous environments, such as Gasoline, thinner, oil, gas or other solid, ﬂ ammable materials.

„Power Punch“

12VDC

Mini Jump Start