User Manual

5
“8” Hardscape Subwoofer
Hardscape installation on a deck or other hard surface:
1. On the mounting surface, use the included mounting template to
mark the holes for the mounting keyways.
2. Pre-drill holes into the mounting surface as indicated by the
template.
3. Drill the included stainless-steel screws into the surface.
4. Attach the Hardscape subwoofer to the stainless-steel screws
(as shown in Figure 6) by sliding the screws into the key-ways on
the underside of the subwoofer- rotating the subwoofer slightly to
lock it into place.
SURFACE
8” Hardscape Subwoofer
Stainless Steel
Mounting Screws
Stainless Steel
Mounting Screws
Figure 4: Pre-Installed Keyway Attachment for Hard Surface
Figure 6: Secure Subwoofer
Figure 5: Ex: Mounting Template