User Manual

6
8” Hardscape Subwoofer
Hardscape installation using the supplied stakes:
1. When choosing a location, make sure that there is at least 1” clearance between the underside of
the subwoofer’s grille and the ground below it.
2. Remove three attached keyways (as shown in Figure 7a) from the underside of the subwoofer.
3. Flip the keyways (as shown in Figure 7b), and then re-attach using the supplied screws.
4. Rest the subwoofer on the desired surface (as shown in Figure 8) and use the supplied metal
stakes to hold the subwoofer in place.
5. Remove any obstructions from around the perimeter of the subwoofer that could impede air ow.
SURFACE
Metal
Stake 1
8” Hardscape Subwoofer
Metal
Stake 2
Metal
Stake 3
Figure 7a: Remove Keyway Figure 7b: Flip/Re-attach Keyway
Figure 8: Secure Subwoofer (Stakes)