Operation Manual

PC-AE1156_IM 07.06.18
37
The appliance may only be used in the manner described
in this operating manual. You may not use it for commercial
purposes.
Any other use shall be considered as not intended use and
can lead to material damage or even personal injury.
The manufacturer shall not be liable for damages caused by
not intended use.
Unpacking the Appliance
1. Remove the appliance from its packaging.
2. Remove all packaging materials like foils, lling materi-
als, cable holders, and carton packaging.
3. Check the scope of deliveries for completeness.
4. If there are missing parts or obvious damage, do not use
the appliance. Return it to your retailer immediately.
NOTE:
There may still be dust or production remains on the
appliance. We recommend that you clean the appliance
as described under “Cleaning”.
Scope of Delivery
1 Base appliance with motor
1 Transparent cover
1 Tamper
1 Centrifuge sieve
1 Centrifuge housing
1 Pulp container
1 Juice jug with skimmer and lid
Overview of the Components
1 Tamper
2 Filler opening
3 Transparent cover
4 Centrifugal sieve
5 Centrifuge housing
6 Height-adjustable spout
7 Closures
8 Juice jug
9 Base appliance with motor
10 Control panel
11 Pulp container
12 Drive wheel (not detachable)
13 Latch
Setting Up of the Appliance
For assembly, also refer to the illustrations on page 3.
1. Place the appliance in such away that the control panel
is facing you.
2. Attach the centrifuge housing on top of the base hous-
ing. The base housing has a recess. Here the spout of
the centrifuge housing must be placed.
3.
WARNING: Risk of Cuts!
The centrifugal sieve is sharp!
Place the centrifugal sieve on top of the drive wheel.
Press it down. It clicks in place on the drive wheel.
4. Check the centrifugal sieve!
Feel under the sieve edge. It should not loosen under
slight tension.
5. Attach the pulp container on the left side. To do so, hold
it slightly sideways to press the upper edge into the
shroud of the centrifuge housing.
6. Attach the transparent cover. It reaches all the way over
the pulp container.
7.
NOTE:
The front closure and the transparent cover are each
provided with a safety switch. These prevent acci-
dental motor start. Check the correct attachment of
all components, the centrifugal sieve, the transparent
cover and the closures.
Secure the transparent cover using both of the closures.
To do this, insert the recesses of the closures into the
locks on the centrifuge housing. Push down the clo-
sures. They must audibly engage.
8. Place the juice jug (without skimmer) at the spout.
Electric Connection
• Before inserting the power plug into the outlet, check
that the mains voltage to be used matches that of the
appliance. You can nd the required information on the
nameplate.
• Connect the appliance only to a correctly installed safety
socket. The button is illuminated. The appliance is
ready for use.
Operation
Preparations
• Wash the fruit to be processed.
• Cut the fruit in pieces to t through the ller opening.
• Remove large pips and stems.
Function Buttons
The buttons on the appliance are touch keys. Gently touch
the buttons with a nger to execute the function. Whenever
a button is pressed, it will be conrmed by a beep sound.