Instructions / Assembly

made in the
from recycled
materials
INSTALLATION GUIDELINES
KEEP YOUR
PATIO PAVERS
IN PLACE
1
Install compacted aggregate base.
Consult your paver supplier for
proper width and depth for the
specific paver application. Wearing
protective eye-wear is recommend-
ed when installing ProFlex™
Aluminum Paver Edging.
DIAGRAM 1
2
Determine the proper positioning for the edging. ProFlex™ Aluminum Paver
Edging is ready to use right out of the box. Cut with a hacksaw or metal snips.
ProFlex™ Aluminum Paver Edging is made from contractor grade materials but
is lightweight and flexible to make curves, and angles. For angles bend edging
around a solid form, or cut two pieces and butt together. The edging should be
installed directly on top of the compact ed aggregate base prior to screeding
sand and settling pavers.
3
Diagram 1 illustrates an installation
with the anchoring tabs underneath
the pavers. Diagram 2 illustrates an
installation with the anchoring tabs
adjacent to the edge of the pavers.
Either is acceptable.
4
A minimum of 3 anchor ing spikes
per 6' piece of edging are recom-
mended. Secure edging by driving
anchoring spikes (included) at a
slight angle through tabs into com-
pacted base. Position spikes at each
end of the edging and a maximum
of 36" apart. For holding large patio
stones or rocks, additional spikes are
recommended and sold separately.
5
Backfill perimeter with topsoil.
Seed, sod or install groundcover,
as specified.
DIAGRAM 2