Installation Sheet

Toilet Tank To Bowl Bolt

Model PF025 , PF035

Toilet Tank To Bowl Bolt

Modelos PF025 , PF035

Toilet Tank To Bowl Bolt

Modèles PF025 , PF035

You may need/Puede necesitar/Vous pourriez avoir besoin

CAP16/06 REV.A www.PROFLO.com

Adjustable Wrench Sponge

Head screwdriver

bucket

PAGE 1
® Toilet Tank To Bowl Bolt Model PF025 , PF035 Toilet Tank To Bowl Bolt Modelos PF025 , PF035 Toilet Tank To Bowl Bolt Modèles PF025 , PF035 You may need/Puede necesitar/Vous pourriez avoir besoin Adjustable Wrench CAP16/06 REV.A bucket Head screwdriver 1 Sponge www.PROFLO.
PAGE 2
1. Turn off water supply. Flush toilet and remove excess water from tank with sponge. Remove water supply line from bottom of toilet fill valve. 1 2. Unbolt tank from bowl, then lift off tank. Remove washers and nuts from bottom of tank, then remove old bolts. Remove old gasket. 2 3. Slide new sponge rubber gasket (small side down) over nut on threaded end of flush valve. Using diagram at right for reference, install bolts as follows: Slide rubber washer under bolt head and insert bolt through tank.