Installation Guide

Carefully read and understand all of the Warnings and installation instructions in this
manual. Failure to follow these instructions could lead to serious bodily injury and/or
property damage. Retain these instructions for future reference.
This pump has been manufactured with your needs in mind. Properly installed in the right
application, your new PROFLO Pump will give you years of carefree performance.
DANGER Water and electricity can be dangerous if certain precautions are not heeded
to. This pump is designed to operate perfectly safe in a water environment; however,
improper use and installation can result in personal harm from electrical shock. Please pay
attention to the following warnings.
WARNING
Never touch any electrical device, including this pump, when it is touching water, in water, or
even in a moist environment. Always unplug (disconnect the electricity) when working on or
installing the unit.
WARNING
RISK OF ELECTRICAL SHOCK. This pump is supplied with a grounding conductor and
grounding-type attachment plug. To reduce the risk of electrical shock, be certain that it is
connected only to a properly grounded, grounding-type receptacle.
WARNING Do not use the power cord or discharge hose/pipe to carry or handle the
pump. Doing so may cause damage to the power cord or discharge hose/pipe. Use the
carrying handle supplied with the pump.
WARNING Always use a grounded outlet. A three-prong mating type receptacle is
needed for safe use. This should be in accordance with the National Electric Code and any
additional codes or laws required by your local government.
NOTICE It is strongly recommended to use a ground fault interrupt (GFCI) device on
any electrical appliance, including this pump, when used in a wet or moist environment. This
is required by many local codes and enforcement agencies.
Ref. #
Description
Part # for Models
PF93501
PF93507
PF93511
1
Power Cord*
2
Handle
PF99051
PF99051
3
Oil Fill Plug with O-ring
PF99056
PF99056
4
Shaft Seal
PF99057
PF99057
5
Impeller
PF99090
PF99090
6
Gasket
PF99089
PF99089
7
Base
PF99077
PF99077
8
Float Switch
PF92000
PF92010
9
Vertical Float Switch Bracket
n/a
PF99105
* Replacement power cords not available for cast iron pumps
** If motor fails, replace entire pump
REPLACEMENT PARTS
1
2
4
5
7
6
3
8
PROFLO Sewage Manual Revised 12-06
8
9
2 7