Installation Guide

29www.powermate.com
REF. PART DESCRIPTION DESCRIPTION DESCRIPCION QTY
NO. NO.
1 Note A Engine Moteur Motor 1
2 0067952 Pump PWH24/2.3 Pompe Bomba 1
3 Note B Flange Nut M8 Ecrou Tuerca 10
4 Note B Washer flat M8 Rondelle plate Arandela plana 6
5 0067674 Frame Cadre Marco 1
6 Note B Bolt M8 x 45 Boulon Perno 2
7 0067533 Knob Bouton Perilla 2
8 0067534 Rubber foot Pied Pie 2
9 Note B Bolt M8 x 25 Boulon Perno 6
10 0067675 Wheel Roue Rueda 2
11 0067676 Axle Essieu Eje 2
12 Note B Bolt M6 x 18 Boulon Perno 2
13 Note B Washer flat M6 Rondelle plate Arandela plana 4
14 Note B Nyloc Nut M6 Ecrou autofreiné Tuerca de nyloc 4
15 0067677 Wand hook Crochet Gancho 1
16 Note B Bolt M6 x 45 Boulon Perno 4
17 0067538 Isolator Sectionneur Aislador 4
18 0067539 Assy, wand & quick connect Baguette et branchement rapide Ensamblado de varilla de pulverización 1
19 0067540 Gun Pistolet Pistola 1
20 0067678 Wand hook Crochet Gancho 1
21 0057705 Grommet Anneau Arandela aislante 5
22 0067542 Nozzle Black Buse Noir Boquilla Negra 1
23 0067543 Nozzle Red Buse Rouge Boquilla Roja 1
24 0067544 Nozzle Yellow Buse Jaune Boquilla Amarilla 1
25 0067546 Nozzle Green Buse Vert Boquilla Verde 1
26 0067545 Nozzle White Buse Pâle Boquilla Blanco 1
27 0067679 Handle Poignée Mango 1
28 0067680 Hose hook Crochet Gancho 1
29 0067549 Hose Tuyau Manguera 1
30 0057701 Chemical Hose
Tuyau pour les produits chimiques Manguera de sustancia quimica 1
31 0057700 Chemical Filter Filtre pour les produits chimiques Sustancia quimica filtro 1
32 0000047 Key SQ 3/16 x 1.75 Touche Tecla 1
33 Note B Washer lock M8 Rondelle serrure Arandela mechon 4
34 Note B Nyloc Nut M8 Ecrou autofreiné Tuerca be nyloc 2
35 Note B Washer flat 22 x 8.5 Rondelle plate Aranela plana 2
PARTS LIST / LISTE DES PIÈCES / LISTA DE PIEZAS
Note A: Consult the accompanying engine manual or contact our service department for assistance.
Note B: These are standard parts available at your local hardware store.
Remarque A: Consulter le manuel du moteur inclus ou contacter notre service après-vente pour toute assistance.
Remarque B: Ces pièces sont des pièces standard disponibles dans les quincailleries.
Nota A: Consulte el manual adjunto del motor o comuníquese con nuestro departamento de servicio para recibir asistencia al
respecto.
Nota B: Estas son piezas estándar disponibles en su ferretería local.
4 www.powermate.com
English
The following Safety Precautions apply whenever using,
storing or servicing PROFORCE
TM
Pressure Washers or their
engines to reduce the possibility of personal injury.
Overlooking or ignoring these precautions can lead to personal
injury or product damage.
• Read this manual carefully. Know your equipment.
Consider applications, potential hazards and
limitations for your unit.
• Know your equipment. Consider the applications,
limitations, and the potential hazards specific to your
unit.
• Store the pressure washer in a well ventilated area
with the fuel tank empty. Fuel should not be stored
near the pressure washer.
• Never operate under theses conditions:
a. A noticeable change in engine speed.
b. A noticeable loss of pressure.
c. The engine misfires.
d. Smoke or flames are present.
e. Enclosed compartment.
f. Excessive vibration.
g. Rain or inclement weather.
• Water spray must never be directed towards any
electric wiring or directly towards the pressure
washer.
• Do not allow the hose to come in contact with hot
muffler.
• Equipment must be placed on a firm, supporting
surface.
• Remove the spark plug or cable from the spark plug
to prevent accidental starting when not in use or
prior to detaching the high pressure hose.
• Keep the pressure washer clean and free of oil, mud
and other foreign matter.
• Do not wear loose clothing, jewelry, or anything that
may be caught in the engine.
• Never direct spray at people or pets.
• Never allow children to operate pressure washer at
any time.
• Use both hands to control the wand.
• Do not touch nozzle or water spray while operating.
• Wear safety goggles while operating.
• Only approved hoses and nozzles should be used.
• The trigger gun must not be jammed in “ON”
position during operation.
• Never tie knots or kink the high pressure hose.
• All hose connections must be properly sealed.
• Prior to starting the pressure washer in cold weather,
be sure ice has not formed in any part of the
equipment.
• Use only recommended chemicals.
• Outdoors use only.
• Place the pressure washer away from cleaning site
during operation.
• To prevent accidental discharge, the spray gun should
be secured by locking trigger when not in use.
• Do not run the pressure washer for more than five
minutes without depressing the trigger or damage to
the pump may result.
• Check the fuel system periodically for leaks or signs
of deterioration such as chafed or spongy hose, loose
or missing clamps, or damaged tank or cap. All
defects should be corrected before operation.
• Do not touch hot muffler.
• Service, operate and refuel under the following
conditions.
a. Good ventilation.
b. Refuel the pressure washer in a well lighted area.
c. Avoid fuel spills and never refuel while the
pressure washer is running.
d. Avoid an ignition source when refueling.
e. Use lead free fuel with a minimum of 85 octane.
• Do not smoke near the pressure washer.
• Do not use damaged high-pressure hoses.