® Model No. 831.100400 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE.
PROFORM® is a registered trademark of ICON Health & Fitness, Inc. LIMITED FIVE YEAR MASSAGE SPA WARRANTY ICON OF/DU CANADA INC., (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. ICON extends a limited five (5) year warranty on the spa shell structure. ICON also extends a limited two (2) year warranty on the pump and motor.
TABLE OF CONTENTS LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 WARNING LABEL IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the following important precautions before using the RESTORATION 600. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the RESTORATION 600 are adequately informed of all precautions. 13. Keep all chemicals away from children and pets. 14. The pH and chemical balance of the water must be maintained as explained in this manual (see page 11).
20. Keep all electrical appliances such as radios, telephones, televisions, and lights at least five feet (1.52 meters) away from the water. 27. WARNING—To reduce the risk of injury: Pregnant women should consult with their physician before using the RESTORATION 600. Pregnant women should not use the spa if the water temperature is above 100°F (38°C); the unborn child could be seriously harmed. 21. A wire connector is provided on the pump motor of this unit to connect a minimum No.
WARNING LABEL IDENTIFICATION The warning labels shown below have been placed on the spa cover, printed inside the inflatable spa liner, and placed on the side of the spa jet unit of the RESTORATION 600. Locate the labels and familiarize yourself with this information. The label on the side of the spa jet unit is an adhesive decal.
BEFORE YOU BEGIN Service Department toll-free at 1-888-936-4266, Monday–Thursday, 8:00 am–6:30 pm; Friday, 8:00 am–6:00 pm EST (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number is 830.100400. The serial number can be found on a decal attached to spa jet unit (see the front cover of this manual). Thank you for selecting the PROFORM® RESTORATION 600.
CHOOSING A LOCATION FOR THE RESTORATION 600 There are many factors to consider when choosing a location to set up the RESTORATION 600. These factors vary depending on whether you use the RESTORATION 600 inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the RESTORATION 600. If you set up the RESTORATION 600 inside: If you set up the RESTORATION 600 outside: 1. The RESTORATION 600 will increase the level of humidity in your home.
ASSEMBLY Before beginning assembly, carefully read the following information and instructions: • Assembly requires the included air pump. • Read each assembly step before you begin. • Assembly requires two people. • During assembly, make sure that all parts are oriented as shown in the drawings. • Place all parts in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. 1.
4. Before you fill the RESTORATION 600, be sure that it is in the position you want, and that it can be easily serviced, if needed. Once the RESTORATION 600 is filled with water, it will need to be drained to be moved. 4 9 13 Using a garden hose or other clean water source, begin filling the RESTORATION 600, until the jet and filter openings on the Spa Jet Unit (13) are covered with water. Do not fill the RESTORATION 600 more than 20” deep with water.
USING THE RESTORATION 600 The RESTORATION 600 is designed for up to four adults. The four water jets can be regulated to provide a relaxing massage to sooth away stress, and the strength of the water massage can be adjusted by the air control. The RESTORATION 600 holds 300 gallons of water and offers an automatic, programmable heating (70°F to 104°F) and filtration system. When connecting the power cord, plug the power cord directly into a grounded circuit capable of carrying 15 or more amps.
and 1/3 of the “Non-chlorine Shox” bottle to the water in the spa. Allow the water to circulate for five minutes. You should now test the pH level of the water. Use the included test strips to check the pH of the water. Refer to the instructions on the test strip packaging to see how to use the test strips. SECURING THE SPA COVER The spa cover can be secured by snapping the latches on the spa cover into the buckles on the side panels.
SPA JET UNIT OPERATION ing the water for twenty minutes to filter any impurities. Also, if the water temperature falls below 40°F, the pump will begin circulating and heating the water to prevent the water from freezing. The spa jet unit features three hydro-therapy jets, a whirlpool jet, a suction vent, and a filter housing. The three hydro-therapy jets (A), located on the front of the spa jet unit, focus the water massage on your neck and back.
MAINTENANCE CLEANING THE INFLATABLE SPA LINER 4. Do not exceed the recommended amounts—follow the directions on the label closely. 5. Keep all containers closed tightly when not in use. 6. Never add water to the chemicals—always add the chemicals to the water as directed. 7. Always store chemicals in a cool, dry place. The liner should be cleaned with a mild soap solution. Do not use solvents. The liner should always be clean and dry before being moved or stored.
TROUBLE-SHOOTING Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-888-936-4266, Monday–Thursday, 8:00 am–6:30 pm; Friday, 8:00 am–6:00 pm EST (excluding holidays). 1. SYMPTOM: THE SPA WILL NOT OPERATE with the spa cover. The spa cover must be tight. Set the air control to low. The water will heat at a rate of 1.7°F an hour.
b. This problem is caused by excess air in the pump circulation system. Check to see if the primer cap is fully tightened. Prime the pump again and fully tighten the primer cap (see PRIMING THE SPA JET UNIT on page 10). 11. SYMPTOM: THE WATER LEVEL DROPS a. Some water loss due to evaporation is normal. If rapid water loss occurs, or if you notice wetness on the floor around the RESTORATION 600, then the liner may have a leak.
NOTES 17
NOTES 18
CUSTOMER RECORD Model No.: Serial No.: Retailer Name: Purchase Date: Retailer Address: PLACE STAMP HERE ICON of Canada Inc.
ORDERING REPLACEMENT PARTS To order replacement parts, simply call our Customer Service Department toll-free at 1-888-936-4266, Monday– Thursday, 8:00 am–6:30 pm; Friday, 8:00 am–6:00 pm EST (excluding holidays). To help us assist you, please be prepared to give the following information when calling: 1. The MODEL NUMBER of the product (831.100400). 2. The NAME of the product (PROFORM® RESTORATION 600). 3. The SERIAL NUMBER of the product (see the front cover of this manual). 4.
81 REMOVE THIS EXPLODED DRAWING FROM THE MANUAL
REMOVE THIS PART LIST/EXPLODED DRAWING FROM THE MANUAL SAVE THIS PART LIST/EXPLODED DRAWING FOR FUTURE REFERENCE PART LIST—Model No. 831.100400 Key No. Qty.
4 11 9 8 15 13 29 37 47 50 35 18 38 17 32 19 45 16 36 44 10 39 39 40 46 27 10 43 25 51 42 48 48 14 5 5 1 6 3 21 6 49 24 41 12 33 22 20 34 28 7 31 30 26 23 2 EXPLODED DRAWING—Model No. 831.100400 SCHÉMA DÉTAILLÉ—No. du Modéle 831.