Owner's Manual

6. Remove and discard the four indicated screws

(C).

Identify the Left and Right Base Covers (82, 83).

Slide the Left Base Cover onto the Left Upright

(89), and slide the Right Base Cover onto the

Right Upright (90). Do not press the Base

Covers into place yet.

Slide the Left and Right Upright Covers (84, 85)

onto the Left and Right Uprights (89, 90).

7. Remove and discard the eight indicated screws

(C).

If there is a tie securing the Cage Nut (92) in the

Right Handrail (87), remove the tie and make

sure that the Cage Nut is in place.

Hold the Right Handrail (87) near the Right

Upright (90). Route the Upright Wire (81) into the

bottom of the Right Handrail and out of the front.

Attach the Right Handrail (87) to the Right

Upright (90) with two 5/16" x 1" Flat Head

Screws (28), a 5/16" x 1 1/4" Screw (8), and

three 5/16" Star Washers (11). Do not fully

tighten the Screws yet.

Attach the Left Handrail (86) to the Left

Upright (89) in the same way. Note: There are

no wires on the left side.

Tie