User's Manual

17
The target zone will
be shown in the target
meter display. The
space between the
flashing bars represents
the watts target or the
speed target for the
segment; the solid bars
represent your actual watts output or your actual
pedaling speed.
As you exercise, keep your watts output or your
pedaling speed within the target zone for the cur-
rent segment by increasing or decreasing your
pedaling speed or by increasing or decreasing the
resistance of the pedals.
IMPORTANT: The target is intended only to pro-
vide motivation. Make sure to pedal at a speed
and a resistance level that is comfortable for
you.
If the resistance level for the current segment is
too high or too low, you can manually override
the setting by pressing the Resistance buttons.
IMPORTANT: When the current segment of the
workout ends, the pedals will automatically
adjust to the resistance level programmed for
the next segment.
If you stop pedaling for several seconds, a series of
tones will sound and the workout will pause.
To restart the workout, simply resume pedaling.
The workout will continue until the last segment of
the workout ends.
4. Follow your progress with the displays.
See step 4 on page 15.
5. Measure your heart rate if desired.
See step 5 on page 16.
6. When you are finished exercising, the console
will turn off automatically.
See step 6 on page 16.
HOW TO USE THE SOUND SYSTEM
To p l ay m usic or audi o bo o ks t hro u gh t he c onso le
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the jack
on the console and into a jack on your MP3 player,
CD player, or other personal audio player; make sure
that the audio cable is fully plugged in. Note: To
purchase an audio cable, see your local electronics
store.
Next, press the play button on
your personal audio player.
Adjust the volume level using the
volume increase and decrease
buttons on the console or the
volume control on your personal audio player.
Targ e t
Zone