Owner's Manual

8
5. Tip: Avoid pinching the wires during this
step.
Attach each Handlebar (35, 36) to a Handlebar
Post (7) with two M8 x 35mm Button Bolts (64)
a
nd two M8 Locknuts (57). Make sure that the
Locknuts are in the hexagonal holes.
5
36
7
7
3
5
57
57
64
64
64
H
exagonal
Holes
Hexagonal
Holes
Avoid pinching
the wires
6
6. Have another person hold the Right and Left
Handlebars (35, 36) near the Upright (6). Insert
the Right and Left Controller Wires (54, 67) into
the holes in the Upright and pull them upward
out of the top of the Upright.
Tip: Avoid pinching the wires. Attach the
Handlebar Posts (7) to the Upright (6) with two
M8 x 56mm Button Screws (61) and two M8
Locknuts (57).
36
35
67
57
54
6
61
61
7
7
Avoid pinching
the wires