Owner's Manual

12. The Transmitter (63) requires two AAA batteries

(not included); alkaline batteries are recom-

mended.

Remove the battery cover from the front of the

ransmitter (63), and insert batteries into the

battery compartment. Make sure that the bat-

teries are oriented as shown by the

diagrams inside the battery compartment.

Then, reattach the battery cover.

Remove the adhesive backing from the Hook

and Loop Fasteners (62). Press a Fastener

onto the Frame (1) in the indicated location.

Orient the Transmitter (63) as shown. Press the

other Fastener (62) onto the back of the

Transmitter.

Attach the Transmitter (63) to the Frame (1)

using the Hook and Loop Fasteners (62).

Battery

Cover

13. Attach the Clamp (67) to the Right Shield (14)

in the indicated location with a Self-tapping

Screw (13).