User`s manual

13
Key
Clip
CONSOLE DIAGRAM
Pulse Sensor
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features
designed to make your workouts more effective and
enjoyable.
When you select the manual mode of the console, you
can change the speed and incline of the treadmill with
the touch of a button. As you exercise, the console will
display continuous exercise feedback. You can even
measure your heart rate using the built-in pulse sensor.
The console also features four preset programs. Each
program controls the speed and incline of the treadmill
as it guides you through an effective workout.
You can even listen to your favorite workout music or
audio books with the console’s MP3 stereo sound sys-
tem.
To use the manual mode of the console, follow the
steps beginning on page 14. To use a preset
program, see page 16. To use the stereo sound
system, see page 17.
T
o prevent damage to the walking platform, always
wear clean athletic shoes while using the treadmill.
During the first few minutes that the treadmill is
used, inspect the alignment of the walking belt,
and
center the walking belt if necessary (see page 20).
HOW TO TURN ON THE POWER
Plug in the power cord (see
page 12). Next, locate the
reset/off circuit breaker on
the treadmill frame near the
power cord. Make sure that
the circuit breaker is in the
“reset” position.
Next, stand on the foot rails of the treadmill. Find the
clip attached to the key (see the drawing above), and
slide the clip onto the waistband of your clothes. Then,
insert the key into the console. After a moment, the dis-
plays will light. Important: In an emergency situa-
tion, the key can be pulled from the console, caus-
ing the walking belt to slow to a stop. Test the clip
by carefully taking a few steps backward; if the key
is not pulled from the console, adjust the position
of the clip.
Reset
Note: If there are sheets of
clear plastic on the console,
remove the plastic.