SDS

ManualsBrandsProForm ManualsBuilding materials5 Gal. All-Purpose Pre-Mixed Joint Compound Pail

Safety Data Sheet SDS No. GB-5002

Ready Mix Joint Compounds

Product Name

Ready Mix Joint Compounds

Product Identifiers

Easy Finish Topping

Easy Finish All Purpose

ProForm All Purpose Heavy Viscosity

ProForm All Purpose Export EX 70

ProForm Multi-Use

ProForm Taping

ProForm Taping Lite

ProForm Lite Blue

ProForm Texture Grade

ProForm Tinted Lite

ProForm Pre-Blend 50 lb. bag

ProForm All Purpose

ProForm All Purpose Machine Grade

ProForm Lite

ProForm Lite with Dust-Tech

ProForm Ultra Lite All Purpose

ProForm Topping

ProForm XP with Dust-Tech

ProForm XP Lite with Dust-Tech

Advantage

Advantage Lite

Advantage Topping

ProForm Concrete-Cover Compound

ProForm Factory Built Housing Texture Grade Compound

Other means of identification

Joint Compound, Taping Compound, Gypsum Board Finishing Compound

Recommended Use

All-purpose drying-type compounds used for finishing gypsum board products. Use per manufacturer’s recommendations

Restrictions on Use

Use in well-ventilated area and avoid breathing dust.

Avoid skin contact.

Manufacturer/Supplier Details

National Gypsum Company

2001 Rexford Road

Charlotte, NC 28211

Emergency Telephone Number

Director Quality Services

(704) 551-5820 - 24 Hour Emergency Response

Website: www.nationalgypsum.com

United States (US)

According to OSHA 29CFR 1910.1200 (HCS)

GHS Classification of the substance or mixture

Carcinogenicity - Category 1A - (H-350)

Specific target organ toxicity, repeated exposure – Category 1 (H-372)

Acute toxicity, inhalation - Category 4 (H-332)

Skin corrosion/irritation Category 2 (H315)

GHS Label Elements

Pictogram

Signal Word Danger

Hazard Statements

H-350 May cause cancer.

H-332, 372 Harmful if inhaled. Causes damage to organs (lungs) through prolonged or repeated

exposure.

H-315 Causes skin corrosion/irritation

Section 1: Product and Company Identification

Section 2: Hazards Identification

Page 1 of 7

Summary of content (7 pages)

PAGE 1
Safety Data Sheet SDS No. GB-5002 Ready Mix Joint Compounds Section 1: Product and Company Identification Product Name Ready Mix Joint Compounds Product Identifiers Easy Finish Topping Easy Finish All Purpose ProForm All Purpose Heavy Viscosity ProForm All Purpose Export EX 70 ProForm Multi-Use ProForm Taping ProForm Taping Lite ProForm Lite Blue ProForm Texture Grade ProForm Tinted Lite ProForm Pre-Blend 50 lb.
PAGE 2
SDS No. GB-5002 Ready Mix Joint Compounds Safety Data Sheet H-315 Section Causes skin corrosion/irritation 2: Hazards Identification (Continued) Precautionary Statements Prevention Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust. Use personal protective equipment as required. (See Section 8) Use engineering controls and wet methods to minimize dust.
PAGE 3
SDS No. GB-5002 Ready Mix Joint Compounds Safety Data Sheet Section 4: First-Aid Measures Inhalation Eye contact Skin contact Ingestion Remove exposed individual to fresh air immediately. If breathing difficulty persists, seek medical attention. Do not rub or scratch eyes. Immediately flush eyes with water for 15 minutes. Remove contact lenses (if applicable). Seek medical attention if irritation persists. Flush and wash skin with soap and water. Utilize lotions to alleviate dryness if present.
PAGE 4
SDS No.
PAGE 5
SDS No. GB-5002 Ready Mix Joint Compounds Safety Data Sheet (k) Vapor pressure: Not available (l) Vapor density: Not available (m) Relative density: ~1.0-1.
PAGE 6
SDS No. GB-5002 Ready Mix Joint Compounds Safety Data Sheet Section 12: Ecological Information (a) Ecotoxicity (aquatic and terrestrial, where available): This product does not present an ecological hazard to the environment. (b) Persistence and degradability: Unknown (c) Bioaccumulative potential: Limestone is a naturally occurring mineral. Biodegradation and/or bioaccumulation potential is not applicable.
PAGE 7
SDS No.