SDS

SDS No. GB-5002
Safety Data Sheet Ready Mix Joint Compounds
Inhalation Remove exposed individual to fresh air immediately. If breathing difficulty persists, seek medical attention.
Eye contact Do not rub or scratch eyes. Immediately flush eyes with water for 15 minutes.
Remove contact lenses (if applicable). Seek medical attention if irritation persists
.
Skin contact Flush and wash skin with soap and water. Utilize lotions to alleviate dryness if present. Seek medical
attention if irritation persists.
Ingestion This product is not expected to be hazardous and no harmful effects are expected upon ingestion of small
amounts. Larger amounts may cause abdominal discomfort or possible obstruction of the digestive tract.
Seek medical attention if problems persist.
Medical Conditions aggravated by exposure
Pre-existing upper respiratory and lung diseases such as, but not limited to, bronchitis, emphysema and asthma. Pre-existing skin
diseases such as, but not limited to, rashes and dermatitis.
Extinguishing Media
Dry chemical, foam, water, or extinguishing media appropriate for surrounding fire.
Unusual Fire and Explosion Hazards
Mixture poses no fire-related hazard.
Special hazards arising from the mixture
None known
Special Protective Equipment and Precautions for Firefighters
A SCBA is recommended to limit exposures to combustion products when fighting any fire.
Personal precautions, protective equipment and emergency procedures
No special precautions required.
General recommendations:
Wear appropriate Personal Protective Equipment. (See Section 8)
Maintain proper ventilation.
Environmental precautions
This product does not present an ecological hazard to the environment.
Dispose of in accordance with applicable federal, state, and local regulations.
Methods and materials for containment and cleaning up
Shovel or scoop spilled material back into container for use, if possible, or disposal.
Maintain proper ventilation to minimize dust.
Avoid washing material down drains. This material will eventually set and can cause clogs.
Precautions for safe handling
Avoid breathing vapors when opening container.
Avoid breathing dust.
Minimize generation of dust.
Provide appropriate exhaust ventilation at places where dust is formed.
Avoid contact with eyes, skin and clothing.
Wear recommended personal protective equipment when handling. (See Section 8)
Conditions for safe storage, including any incompatibilities
Store material in a cool, dry, ventilated area, away from excessive heat or sunlight.
Keep from freezing to preserve usefulness.
Keep containers closed when not in use.
Avoid contact with strong acids.
Section 4: First-Aid Measures
Section 5: Fire-Fighting Measures
Section 6: Accidental Release Measures
Section 7: Handling and Storage
Page 3 of 7