SDS

SDS No. GB-5002
Safety Data Sheet Ready Mix Joint Compounds
Page 2 of 7
H-315 Causes skin corrosion/irritation
Precautionary Statements
Prevention
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Do not breathe dust.
Use personal protective equipment as required. (See Section 8)
Use engineering controls and wet methods to minimize dust.
Response
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
If on skin, wash with plenty of soap and water.
If in eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Get medical attention if exposed or concerned.
Storage
Store material in a cool, dry, ventilated area, away from excessive heat or sunlight.
Disposal
Dispose of material in accordance with federal, state, and local regulations
Common name/ Identifiers
Chemical Name Synonym CAS Number % (weight)
Calcium Carbonate or
Calcium/Magnesium
Carbonate
Limestone or
Dolomite
1317-65-3
16389-88-1
<50
And may contain one or more of the following:
Mixture-silicates and
aluminates
Mica 12001-26-2 <10
Hydrated magnesium
silicate
Talc (non-asbestiform) 14807-96-6 <5
Mixture-various metal
oxides
Perlite 93763-70-3 <10
magnesium aluminum
phyllosilicate
Attapulgite Clay 12174-11-7 <5
Magnesium silicate
Sepiolite Clay 63800-37-3 <5
Magnesium aluminum
phyllosilicate
Smectite Clay 1302-78-9 <5
Polyvinyl Acetate Latex 9003-20-7 <5
Ethylene Vinyl Acetate
Latex
24937-78-8 <5
Vinyl Acetate/Acrylic
Copolymer
108-05-4 <5
All concentrations are in percent by weight unless ingredient is a gas.
Section 3: Composition/Information on Ingredients
Section 2: Hazards Identification (Continued)