Owner's Manual

6
2. Identify the Right Frame Cover (49), which is
marked with an “R” sticker. Then, orient the
Right Frame Cover so that the rounded side is in
the indicated location. While another person lifts
the rear of the Frame (1), attach the Right
Frame Cover with two M4 x 16mm Screws (84).
Repeat this step for the Left Frame Cover
(48).
1
.
P
ull the ramp handle outward and lower the
Ramp (104) until it rests on the Frame (1).
Attach a Wheel (50) to the front of the Frame
(1) with an M10 x 41mm Shoulder Screw (63).
Attach the other Wheel (not shown) in the
same way.
1
To make assembly easier, read the
i
nformation on page 5 before you begin
assembling the elliptical exerciser.
1
63
50
Ramp
Handle
104
2
48
Rounded
Side
1
Rounded
Side
84
49