Service manual

4
Figure 1—Chrysler applications
FORD APPLICATIONS:
NOTE: Unless replacing an existing Holley® Carburetor, you will need to purchase Holley® P/N 20-91, spring and perch kit, for
Ford automatic transmissions.
1. Install the new throttle ball, lockwasher, and retaining nut to the carburetor throttle lever in the same position as the existing
carburetor.
2. Insert the transmission kickdown screw with the black retaining clip on the transmission kickdown lever (Figure 2). This
assembly must be installed according to the detailed drawing (Figure 3).
Figure 2—Ford applications
3. Remove the lock out screw from the kickdown lever (Figure 4).
4. Install the transmission kickdown spring between the transmission kickdown lever and spring perch on the solenoid/dashpot
bracket (Figure 2).