Model No. PFTL99220 Serial No. USER'S MANUAL Serial Number Decal QUESTIONS? If you have questions, or if there are missing or damaged parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID DELAYS, PLEASE CALL DIRECT TO OUR TOLLFREE CUSTOMER HOT LINE. The trained technicians on our Customer Hot Line will provide immediate assistance, free of charge to you. CUSTOMER HOT LINE: 1-800-999-3756 Mon.–Fri., 6 a.m.–6 p.m.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15. Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill. 16. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 17. Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord and move the reset/off circuit breaker to the off position when the treadmill is not in use. (See the drawing on page 4 for the location of the circuit breaker.
BEFORE YOU BEGIN Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number of the treadmill is PFTL99220. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location). Thank you for selecting the revolutionary PROFORM® 765 i treadmill.
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance.
3. Attach the Latch Assembly (82) to the Left Upright (84) with the two Latch Screws (56). Start both Latch Screws before tightening either of them. Note: The Latch Screws may be preattached to the Left Upright. 3 82 56 84 4. See step 6 and locate the four Upright Bolts (86). Loosen the Upright Bolts two to three turns. See drawing 4c. With the help of a second person, hold the Console Base (101) near the Uprights (80, 84).
6. Press a CD Holder (85) into each side of the Upright Base (97). If the Wheels (not shown) are touching the floor, or if the treadmill rocks slightly, see HOW TO LEVEL THE TREADMILL on page 20. 6 84 85 85 97 86 80 If you wish to adjust the height of the Uprights (80, 84), go to step 7. If the Uprights are at the desired height, tighten the four Upright Bolts (86) and go to step 8. 97 86 7. Note: The Uprights (80, 84) can be attached at three different heights.
OPERATION AND ADJUSTMENT an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCI-equipped outlets. THE PERFORMANT LUBETM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant.
Note: If there are thin sheets of clear plastic on the console, remove them. Clip Key FEATURES OF THE CONSOLE cline of the treadmill as a personal trainer guides you through every step of your workout. High-energy music provides added motivation. To purchase iFIT.com CDs, call toll-free 1-800-735-0768. The treadmill console offers an impressive array of features that help you get the most from your workouts.
walking. As you exercise, change the speed of the walking belt as desired by pressing the Speed ▼ and ▲ buttons. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph. To change the speed setting quickly, press the Quick Speed buttons. Note: The console can display speed and distance in either miles or kilometers. For simplicity, all instructions in this section refer to miles.
To change the unit of measurement, first hold down the Stop button while inserting the key into the console. An “E” for English miles or an “M” for metric kilometers will appear in the Speed display. Press the Speed ▲ button to change the unit of measurement. When the desired unit of measurement is selected, remove the key. 6 Measure your heart rate if desired. You can measure your heart rate using either the handgrip pulse sensor or the optional chest pulse sensor.
The speed setting for the Current Segment first segment is shown in the flashing Current Segment column of the matrix. (The incline settings are not shown in the matrix.) The speed settings for the next seven segments are shown in the seven columns to the right. HOW TO USE PRESET PROGRAMS 1 Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 10. 2 Select one of the preset programs. When the key is inserted, the manual mode will be selected.
To stop the program temporarily, press the Stop button. The Time/Pace display will begin to flash. To restart the program, press the Start button or the Speed ▲ button. To end the program, press the Stop button, remove the key, and then reinsert the key. 4 HOW TO USE HEART RATE PROGRAMS CAUTION: If you have heart problems, or if you are over 60 years of age and have been inactive, do not use the heart rate programs.
4 During heart rate programs, the matrix will show a graphic that represents your heart rate. Each time a heartbeat is detected, an additional peak will appear. automatically increase or decrease to bring your heart rate closer to the target heart rate.
During the CD program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes. In some instances, the speed and/or incline may change before the personal trainer describes the change. HOW TO USE IFIT.COM CD PROGRAMS When you use an iFIT.
6 HOW TO PLAY MUSIC CDS Follow your progress with the track and the displays. If desired, you can play your own music CDs in the CD player. Before playing music CDs, select the manual mode of the console (see HOW TO USE THE MANUAL MODE on page 10). Note: Due to the nature of CD players, the ability of the player to read a CDRW disk while a user is running vigorously on the treadmill may be affected by factors such as the condition of the CD-RW and the quality of the burner used to create the CD-RW.
HOW TO CONNECT THE TREADMILL TO YOUR COMPUTER HOW TO CONNECT THE TREADMILL TO YOUR VCR OR COMPUTER Note: If your computer has a 3.5mm LINE OUT jack, see instruction A. If your computer has only a PHONES jack, see instruction B. HOW TO CONNECT THE TREADMILL TO YOUR VCR A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the LINE OUT jack on your computer.
heard, the speed and/or incline will change to the next settings of the video program. HOW TO USE IFIT.COM VIDEO PROGRAMS To stop the walking belt at any time, press the Stop button on the console. The Time/Pace display will begin to flash. To restart the program, press the Start button or the Speed ▲ button. After a moment, the walking belt will begin to move at 1 mph. When the next “chirp” is heard, the speed and incline will change to the next settings of the video program. To use iFIT.
7 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE When the on-screen countdown ends, the program will begin and the walking belt will begin to move. Hold the handrails, step onto the walking belt, and begin walking. During the program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes.
THE INFORMATION MODE/DEMO MODE THE OPTIONAL CHEST PULSE SENSOR The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode. An optional chest pulse sensor adds even more features to the console.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE 1 Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department tollfree at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The power does not turn on SOLUTION: a.
With the help of a second person, carefully raise the Upright Base (97) as shown. Carefully pivot the Hood (123) off. 97 123 Locate the Reed Switch (22) and the Magnet (19) on the left side of the Pulley (18). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the Screw (23) and move the Reed Switch slightly. Retighten the Screw.
CONDITIONING GUIDELINES ergy. Only after the first few minutes does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems.
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 1 2. Hamstring Stretch Sit with one leg extended.
PART LIST—Model No. PFTL99220 R0903A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32* 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 12 2 2 2 2 2 2 2 2 4 2 1 2 4 2 2 1 1 8 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 2 10 2 1 2 1 5 1 1 1 1 1 1 Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 1 1 8 1 1 1 1 44 1 1 1 1 1 2 1 1 1 1 1 Description Console Base iFIT.com Wire Ground Screw/Choke Screw Key Clip Optic Disk Fan Console Screw Left Tray CD Console Right Tray iFIT.com Wire iFIT.com Jack Motor Bracket Bolt Photo Switch Screw Console Base Frame Left Handgrip Photo Switch Nut Left Bottom Handgrip Key No. Qty.
62 65 35 66 126 39 2 64 16 52 69 1 62 39 8 7 6 5 2 2 126 63 16 13 12 52 68 60 14 11 3 10 9 35 67 15 4 2 11 59 129 103 69 42 73 34 11 4 17 2 3 18 9 8 12 10 7 6 5 2 23 11 20 42 21 19 22 28 15 58 115 105 73 34 38 37 57 17 20 20 38 52 36 108 61 39 32* 39 114 33 20 44 26 30 108 55 31 125 118 20 25 14 98 24 27 29 70 41 128 21 54 103 43 78 53 108 72 83 123 52 52 78 45 53 46 44 52 53 48 44 47
86 56 90 89* 88 91 127 84 82 94 87 92 20 79 87 108 81 95 39 96 71 77 86 85 20 100 91 89* 97 108 80 127 108 99 40 108 76 108 94 20 79 90 92 88 87 25 108 103 87 95 108 39 96 20 76 75 103 85 77 74 25 75 107 101 99 40 106 108 100 108 109 108 104 108 108 108 119 108 108 108 110 108 117 108 108 108 120 108 111 108 108 108 116 113 121 44 108 112 108 108 51 108 108 108 108 108 108 130 108 108 122 124 44 108 10
HOW TO ORDER REPLACEMENT PARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).