Hydrotherapy Spa Model No. 831.210020 Serial No. The serial number can be found in the location shown below. Write the serial number in the space above. USER'S MANUAL Serial Number Decal (on the frame behind the access cover) QUESTIONS? PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our customer hot line will provide immediate assistance, free of charge to you. CUSTOMER HOT LINE: 1-800-999-3756 Mon.ÐFri., 6 a.m.Ð6 p.m.
TABLE OF CONTENTS LIMITED ONE YEAR MASSAGE SPA WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 CHOOSING A LOCATION FOR THE RESTORATION 2.0 . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF DROWNING, ELECTRIC SHOCK, OR SERIOUS INJURY, READ THE FOLLOWING IMPORTANT PRECAUTIONS BEFORE USING THE RESTORATION 2.0. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the RESTORATION 2.0 are adequately informed of all precautions. 9. Do not bring any object into the RESTORATION 2.0 that could damage the spa shell. 10. Never insert any object into any opening. 2. Use the RESTORATION 2.
28. DANGERÑTo reduce the risk of drowning: ¥ Never use the RESTORATION 2.0 alone; ¥ Children should not use the RESTORATION 2.0 unless they are supervised by an adult; ¥ Keep pets away from the RESTORATION 2.0 at all times; ¥ Always replace and lock the spa cover when the RESTORATION 2.0 is not in use. 20. Do not use an extension cord with the RESTORATION 2.0. This could damage the motor and will void the warranty. 21. DANGERÑIf you will be using the RESTORATION 2.
34. WARNINGÑTo reduce the risk of injury or drowning: Consult your physician about possible side-effects of any medications you may be taking before using the RESTORATION 2.0. Heat from the water, in conjunction with some medications may cause drowsiness and increase the risk of drowning. Others can effect blood pressure, heart rate, and circulation. 37.
BEFORE YOU BEGIN Thank you for selecting the innovative PROFORM¨ RESTORATION 2.0 Massage Spa. The RESTORATION 2.0 offers the features and quality of a traditional hot tub at an affordable price. Best of all, the RESTORATION 2.0 provides the benefits of hydrotherapy in the comfort of your own home. Hydrotherapy is a proven method for soothing tired muscles after exercise or for relieving the stress of a busy life. The warm environment stimulates blood flow which is essential in the healing process.
CHOOSING A LOCATION FOR THE RESTORATION 2.0 There are many factors to consider when choosing a location to set up the RESTORATION 2.0. These factors vary depending on whether you use the RESTORATION 2.0 inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the RESTORATION 2.0. If you set up the RESTORATION 2.0 inside: If you set up the RESTORATION 2.0 outside: 1. The RESTORATION 2.0 will increase the level of humidity in your home.
SET-UP AND ASSEMBLY Before beginning assembly, carefully read the following information and instructions: ¥ Read each assembly step before you begin. ¥ During assembly, make sure that all parts are oriented as shown in the drawings. ¥ Place all parts in a cleared area and remove the packing materials from the spa shell; do not dispose of the packing materials until assembly is completed. TOOLS REQUIRED FOR ASSEMBLY: ¥ Your own phillips screwdriver ¥ Assembly requires two people.
4. Insert a Support Ball (8) into each mesh pocket on the underside of the Spa Cover (12). 4 8 Mesh Pocket See inset drawing A. Insert the inflation tube into the hole in one of the Support Balls (8). Inflate the Support Ball. See inset drawing B. When the Support Ball (8) is inflated, remove the inflation tube and insert the ball plug through the mesh into the Support Ball. The head of the ball plug will hold the Support Ball in place. 12 Inflate the other Support Ball (8) in the same manner.
USING THE RESTORATION 2.0 The RESTORATION 2.0 is designed to seat two adults. The six thera-jets can be regulated to provide a relaxing massage to sooth away stress, and the strength of the water massage can be adjusted by the air control. The RESTORATION 2.0 holds 120 gallons of water and offers an automatic, programmable heating (70¡F to 104¡F) and filtration system. TESTING AND TREATING THE WATER The RESTORATION 2.0 comes with a starter chemical pack for maintaining the water in the spa.
thera-jets have been shut off, the pump will begin cycling to heat the water if the temperature falls below the minimum setting. Note: To keep the heat cycle from running, the power cord must be unplugged. USING THE CONSOLE Air Control: Determines the amount of air that is in the spa jet system during operation. If the control is turned to the left, the amount of air flowing through the jets will increase. If the control is turned to the right, the amount will decrease.
USING THE INSULATION BLANKET SECURING THE SPA COVER The insulation blanket works with the spa cover to trap the heat and help the water to heat faster. To use the blanket, simply lay it on the surface of the water after you have filled the spa and treated the water. You should always replace the blanket and cover once you get out of the spa. Note: The insulation blanket and spa cover must be in place for the water to reach and maintain the desired temperature.
MAINTENANCE The RESTORATION 2.0 is designed to provide you with years of enjoyment. Please follow the guidelines below to properly maintain your spa. damage. We suggest that you treat the wood finish twice a year with an additional coat of weather sealant. Contact you local spa and pool supplier for advice on which sealants work best in your climate. MAINTENANCE SCHEDULE CHECKING AND CLEANING THE FILTER DAILY ¥ Check the water level and refill the spa to the level shown on page 8, step 1.
WATER CHEMISTRY ATTACHING AND REMOVING THE ACCESS COVER The RESTORATION 2.0 comes with a starter chemical pack for maintaining the water in the spa. (See TESTING AND TREATING THE WATER on page 10.) Additional chemicals can be purchased at a pool and spa supply store. To remove the access cover, remove the two cover screws from the access cover. Slide the access cover down and pull the bottom of access cover away from the Spa Unit. Be careful not to damage the spa shell as you remove the cover.
2. Unplug the power cord. 3. Remove the access cover from the back of the spa unit. 4. Remove the drainage hose from the clip and attach a garden hose to the valve on the drainage hose. Cut-off Valve Cut-off Valve Valve If you are planning to work on the pump/motor, you will also need to drain the pump (see page 14). Drain Hose Knob To open the valves, turn the handles until they are unlocked, and pull the handles out to the open position. 5. Open the valve by turning the knob counterclockwise.
TROUBLE-SHOOTING Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1. SYMPTOM: THE SPA WILL NOT OPERATE b. The pump may have a bad bearing.
8. SYMPTOM: THE WATER PULSATES OR THERE IS MINIMUM WATER FLOW 10. SYMPTOM: THE WATER LEVEL DROPS a. Some water loss due to evaporation is normal. If rapid water loss occurs, or if you notice wetness on the floor around the RESTORATION 2.0, then the spa shell may have a leak. Contact your local spa and pool service provider for repairs. a. Adjust the water level. This usually occurs only when the water level is low. Add water until the thera-jets are covered (see step 1 on page 8). 9.
PART LISTÑModel No. 831.210020 Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 16 8 4 4 4 1 1 2 1 1 1 1 1 1 1 1 1 1 2 1 1 1 Description Buckle Screw Buckle Motor Screw Washer Rubber Insulator Heat Sensor Console Support Ball Power Cord/Supply Rubber Damper Pump Motor Insulation Blanket Spa Cover Drowning Warning Decal Spa Unit Sun Warning Decal Filter Housing Housing Ring Cover Screws Filter Cover Filter Suction Cover Screw R0198A Key No. Qty.
EXPLODED DRAWINGÑModel No. 831.
Model No. 831.210020 QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our customer hot line will provide immediate assistance, free of charge to you.
