Manual

12. Orient the Shield Cover (12) as shown. Insert the

Wire Harness (53) upward through the Shield

Cover.

Slide the Shield Cover (12) onto the Upright (2).

Then, press the Shield Cover into the Right and

Left Shields (38, 39).

38, 39

13. While a second person holds the Handlebar (13)

near the Upright (2), insert the Wire Harness (53)

upward through the bracket on the Handlebar.

Tip: Avoid pinching the wires. Insert the

Handlebar (13) into the Upright (2). Attach the

Handlebar with three M8 x 16mm Screws (55);

start all of the Screws, and then tighten them.

Tip: Avoid

pinching the

wires