Manual

5. 5
Withthehelpofasecondperson,carefullytip
thetreadmillontoitsrightside.Partiallyfoldthe
Frame(55)sothatthetreadmillismorestable;
donotfullyfoldthe Frameyet.
Removeanddiscardthetwoindicatedbolts(A)
andtheshippingbracket(B).
AttachaWheel(96)totheBase(95)witha3/8"
x2" Bolt(8)anda3/8"Nut(10).Donotover-
tightentheNut;theWheelmustturnfreely.
Pressa BaseCap(89)intotheBase(95).
89
B
55
,
Align the oval hole in the Left Upright Spacer
(88) with the oval hole in the Base (95) as
described in step 3.
Hold a Bolt Spacer (14) inside the lower end of
the Left Upright (84). Insert a 3/8" x 4 1/4" Patch
Bolt (7) with a 3/8" Star Washer (11) into the
Left Upright and the Bolt Spacer. Repeat this
step with a second Bolt Spacer (14), 3/8" x
4 1/4" Patch Bolt (7), and 3/8" Star Washer
(11).
Hold the Left Upright Spacer (88) and the Left
Upright (84) against the Base (95). Tighten the
3/8" x 4 1/4" Patch Bolts (7) until the heads of
the Patch Bolts touch the Left Upright; do not
fully tighten the Patch Bolts yet.
With the help of a second person, tip the tread-
mill so that the Base (95) is flat on the floor.
7_ 84
14
95 _
9