Owner's Manual

15
34. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley and a Cable
Trap (25) to the indicated hole in the Butterfly Upright
(1) with a 3/8Ó x 3 3/4Ó Bolt (59), a 3/8Ó Flat Washer
(48), and a 3/8Ó Nylon Locknut (50). Make sure that
the Cable Trap is oriented as shown.
34
48
24
75
25
50
1
59
35. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley and a Cable
Trap (25) to the lowest hole in the Pulley Plates (23)
with a 3/8Ó x 2Ó Bolt (54) and a 3/8Ó Nylon Locknut
(50). Make sure that the Cable Trap is oriented as
shown.
35
24
75
25
50
54
23
36
50
57
24
75
36. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley to the indi-
cated bracket on the Butterfly Base (4) with a 3/8Ó x
1 3/4Ó Bolt (57) and a 3/8Ó Nylon Locknut (50).
4
Bracket