Owner's Manual

18
43. Route the Low Cable (75) through the hole in the
center of the Press Frame (8). Wrap the Low Cable
around a 3 1/2Ó Pulley (24) in the direction shown.
Attach the Pulley and a Cable Trap (25) to the indi-
cated hole in the Press Frame (8) with a 3/8Ó x 3 1/2Ó
Bolt (56), a 3/8Ó Flat Washer (48), and a 3/8Ó Nylon
Locknut (50). Make sure the Cable Trap is oriented
as shown.
43
50
8
24
56
75
25
48
44. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley inside the
indicated bracket on the Press Upright (2) with a 3/8Ó
x 1 3/4Ó Bolt (57) and a 3/8Ó Nylon Locknut (50).
44
50
75
24
2
57
Bracket
45. Route the Low Cable (75) through the hole in the cen-
ter of the Press Frame (8). Wrap the Low Cable
around a 3 1/2Ó Pulley (24) in the direction shown.
Attach the Pulley and a Cable Trap (25) to the indicat-
ed hole in the Press Frame (8) with a 3/8Ó x 3 1/2Ó
Bolt (56), a 3/8Ó Flat Washer (48), and a 3/8Ó Nylon
Locknut (50). Make sure that the Cable Trap is ori-
ented as shown.
45
50
24
46. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley and a Cable
Trap (25) to the indicated hole in the Press Upright
(2) with a 3/8Ó x 3 3/4Ó Bolt (59), a 3/8Ó Flat Washer
(48), and a 3/8Ó Nylon Locknut (50). Make sure that
the Cable Trap is oriented as shown.
46
75
59
24
25
48
50
2
25
75
8
48
56