Owner's Manual

19
47. Route the Low Cable (75) through the hole in the
center of the Press Frame (8). Attach the Low Cable
to the indicated hole in the Leg Lever (41) with a 3/8Ó
x 2 3/4Ó Bolt (46), two 3/8Ó Flat Washers (48), and a
3/8Ó Nylon Jam Nut (63).
Go back to step to step 27 and follow the instruc-
tions to tighten the Cables.
47
75
8
46
48
63
41
48
48. Attach the Shroud (34) to the brackets underneath
the Weight Top Frame (66) with two 1/4Ó x 5/8Ó
Screws (97).
97
66
97
34
Bracket
48
49. Attach the Shroud (34) to the brackets on the Weight
Base (5) with two 1/4Ó x 5/8Ó Screws (97).
97
34
97
5
49