Owner's Manual

52. Attach the Curl Pad (91) to the welded plate on the
Butterfly Front Leg (3) with two 1/4Ó x 3/4Ó Bolts (49).
52
49
91
3
53. Press a 1Ó x 2Ó Inner Cap (83) into each end of a
Backrest Adjustment Frame (70). Press a 1 1/4Ó Inner
Cap (35) into the indicated tube on the Backrest
Adjustment Frame.
Insert a 1/4Ó x 1 1/2Ó Carriage Bolt (101) into the cen-
ter hole in a Seat Plate (65). Attach the Seat Plate to
the Press Backrest (99) with two 1/4Ó x 3/4Ó Bolts (49).
Insert the 1/4Ó x 1 1/2Ó Carriage Bolt (101) into the
indicated hole in the Backrest Adjustment Frame (70)
and secure it with a 1/4Ó Flat Washer (71) and a 1/4Ó
Nylon Locknut (68). Secure the other end of the
Backrest with a 1/4Ó x 1 1/2Ó Bolt (82) and a 1/4Ó Flat
Washer (71).
Slide the tube on the Backrest Adjustment Frame (70)
into the indicated slot in the Press Upright (2) and
secure it with the pre-assembled Adjustment Knob (78).
71
2
78
71
68
35
82
83
83
49
70
101
65
99
53
21
54. Insert a 1/4Ó x 2 1/2Ó Carriage Bolt (45) into the center
hole in a Seat Plate (65). Attach the Seat Plate to a
Seat (13) with two 1/4Ó x 3/4Ó Bolts (49). Insert the
1/4Ó x 2 1/2Ó Carriage Bolt (45) into the indicated hole
in the Press Seat Frame (7) and secure it with a 1/4Ó
Flat Washer (71) and a 1/4Ó Nylon Locknut (68).
Secure the other end of the Seat (13) with a 1/4Ó x
2 1/2Ó Bolt (79) and a 1/4Ó Flat Washer (71).
54
71
7
68
49
71
79
13
65
45
55. Press 3/4Ó Round Inner Caps (43) into the ends of the
two Pad Tubes (42).
Insert one Pad Tube (42) into the indicated hole in the
Press Front Leg (20). Slide a Foam Pad (30) onto
each end of the Pad Tube.
Insert the other Pad Tube (42) into the indicated hole
in the Leg Lever (41). Slide a Foam Pad (30) onto
each end of the Pad Tube.
30
30
43
42
43
30
42
20
41
30
55