Owner's Manual

10. Press a 2Ó Square Inner Cap (28) into the each of the
Press Top Frame (9).
Attach the Press Top Frame (9) to the indicated
bracket at the top of the Press Upright (2) with two
5/16Ó x 2 3/4Ó Bolts (89), a Support Plate with (94)
and two 5/16Ó Nylon Locknuts (64).
10
94
64
9
28
89
28
2
9. Lubricate the insides of the holes in the Top Weight
assembly (104). Press the Weight Tube Bumper (18)
into the indicated end of the Weight Tube (17).
Slide the Weight Tube (17) and the Top Weight
assembly (104) onto the Weight Guides (15). Insert
the Weight Tube into the stack of Weights (21).
9
15
21
18
17
104
Hole
Lubricate
8
11. Place the Weight Top Frame (66) onto the indicated
bracket on the Butterfly Upright (1). Note: The two
Weight Guides (15) must be behind the Weight
Top Frame as shown in step 14.
Attach the Weight Top Frame (66) to the Butterfly Top
Frame (33) with two 5/16Ó x 2 3/4Ó Bolts (89), a
Support Plate (94), and two 5/16Ó Nylon Locknuts
(64). Do not tighten the Nylon Locknuts yet.
Attach the Weight Top Frame (66) to the bracket on
the Butterfly Upright (1) with two 3/8Ó x 2 3/4Ó Bolts
(46), two 3/8Ó Flat Washers (48), and two 3/8Ó Nylon
Locknuts (50). Do not tighten the Nylon Locknuts
yet.
11
89
48
46
94
33
1
64
66
50
15
Bracket