Owner's Manual

7
2
. Attach six Base Pads (125) to the bottom of the Base
(
131) with six 1” Tek Screws (126). Note: Only four Base
Pads are shown.
With the help of another person, carefully tip the tread-
m
ill so that the Base Pads (125) are resting on the floor.
131
125
125
125
1
26
126
126
2
3
3. Attach a Wheel (139) to the right side of the Base (131)
with a Wheel Bolt (134) and a Wheel Nut (45) as shown.
Attach a Wheel (not shown) to the left side of the Base
(131) in the same way.
139
45
134
131
4. Remove the pre-attached screws. Attach the Latch
Assembly (110) to the Left Upright (111) with the two
Latch Screws (109). Be careful not to overtighten the
Screws.
110
111
109
4