User's Manual

15. Attach the Left Handrail Cover (79) and the Right

Handrail Cover (92) to the Handrails (86, 87) with

three #8 x 1/2" Screws (1) each. Do not over-

tighten the Screws.

14. See the inset drawing. Connect the Upright

Wire (81) to the console wire (D). The connec-

tors should slide together easily and snap

into place. If they do not, turn one connector

and try again. IF YOU DO NOT CONNECT THE

CONNECTORS PROPERLY, THE CONSOLE

MAY BECOME DAMAGED WHEN YOU TURN

ON THE POWER.

Insert the excess wires (D, 81) into the Right

Upright (90).

Firmly tighten the four 5/16" x 1/2" Screws (4)

(only two are shown).