User's Manual

6. Measure your heart rate if desired.

Note: If you use the handgrip heart rate moni-

tor and the chest heart rate monitor at the same

time, the console will not display your heart

rate accurately. For information about the chest

heart rate monitor, see page 16.

Before using

the handgrip

heart rate moni-

tor, remove the

sheets of plastic

from the metal

contacts on the

pulse bar. In ad-

dition, make sure

that your hands

are clean.

To measure your heart rate, stand on the foot

rails and hold the pulse bar with your palms on the

metal contacts; avoid moving your hands. When

your pulse is detected, several dashes will appear

and then your heart rate will be shown. For the

most accurate heart rate reading, continue to

hold the contacts for about 15 seconds.

7. Turn on the fan if desired.

The fan features multiple

speed settings. Press

the fan increase or de-

crease buttons to select

a fan speed or to turn off

the fan. Note: If the fan

is on when the walking belt is stopped, the fan will

turn off automatically after a few minutes.

8. When you are finished exercising, remove the

key from the console.

Step onto the foot rails, press the Stop button, and

adjust the incline of the treadmill to zero. The

incline must be at zero or you may damage the

treadmill when you fold it to the storage posi-

tion. Next, remove the key from the console and

put it in a secure place.

When you are finished using the treadmill, press

the power switch into the off position and unplug

the power cord. IMPORTANT: If you do not do

this, the treadmill’s electrical components may

wear prematurely.

Contacts