User Manual

12
7. Attach the two Handrails (74) to the Uprights (84)
with two of the 5/16" x 2" Screws (2) that you
removed in step 3 and two 5/16" Star Washers
(8); do not fully tighten the Screws yet. Be
careful not to pinch the Upright Wire (83) on
the right side.
Then, remove and discard the two indicated
screws (B).
B
B
84
83
74
74
8
8
7
2
2
8. Set the console assembly (C) face down on
a soft surface to avoid scratching the console
assembly.
Remove and discard the four indicated screws
(D). Then, remove the Pulse Crossbar (80).
C
80
D
8
D