User's Manual

9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the

walking belt (see page 28). To protect the floor or carpet, place a mat under the treadmill.

8. Raise the Frame (54) to the storage position. (See HOW

TO FOLD THE TREADMILL FOR STORAGE on page

25.) Attach the Left and Right Rear Feet (63, 58) to the

bottoms of the Left and Right Rear Endcaps (64, 62)

with four 3/4” Screws (6) as shown. Note: There are

stickers identifying the Left and Right Rear Feet. Be

careful not to overtighten the Screws.