Model No. PETL61606.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call: 08457 089 009 or write: ICON Health & Fitness, Ltd. Customer Service Department Unit 4 Revie Road Industrial Estate Revie Road Beeston Leeds, LS118JG UK email: csuk@iconeurope.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 12. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed, accelerate, or stop unexpectedly, which may result in a fall and serious injury. 1.
21. Do not change the incline of the treadmill by placing objects under the treadmill. 25. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only. 22.
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM® 620 V treadmill. The 620 V treadmill offers an impressive selection of features designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique 620 V treadmill can be folded up, requiring less than half the floor space of other treadmills. ing this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us.
4 1/2” Bolt (78)–4 ension Leg t (106)–4 ew (123)–2 ASSEMBLY Wash Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not 3/4” Tek Screw (58)–4 dispose of the packing materials until assembly is completed. 1/2” Silver Screw (48)–1 Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a (60)–2 small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
2. Identify the Left Upright (73) and the Right Upright (74). Hold the Right Upright near the Right Base Cover (77) as shown. Insert the Upright Wire Harness (75) up through the rectangular hole in the bottom of the Right Upright and out of the top of the Right Upright. 2 73 Gently pull up on the Upright Wire Harness (75) as you set the Right Upright (74) on the Base (83) inside the Right Base Cover (77). Be careful not to pinch the Upright Wire Harness.
4. With the help of a second person, hold the console assembly near the Uprights (73, 74). 4 Console Assembly Connect the Upright Wire Harness (75) to the Console Wire Harness (71). Make sure to connect the connectors properly (see the inset drawing). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. 73 71 75 75 5.
7. Slide the Right Upright Sleeve (96) against the console assembly. Attach the Right Upright Sleeve with two 3/4" Screws (4). 7 Attach the Left Upright Sleeve (not shown) to the Left Upright (73) in the same way. 73 4 96 4 74 8. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 27). To protect the floor or carpet from damage, place a mat under the treadmill.
HOW TO USE THE CHEST PULSE SENSOR HOW TO PUT ON THE CHEST PULSE SENSOR The chest pulse sensor consists of two components: the chest strap and the sensor unit (see the drawing below). Insert the tab on one end of the chest strap into the hole in one end of the sensor unit, as shown in the inset drawing. Press the end of the sensor unit under the buckle on the chest strap. The tab should be flush with the front of the sensor unit.
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed.
FEATURES OF THE CONSOLE with the 8-week Weight Loss program, or train for a long-distance run with the Marathon program. iFIT programs automatically control the treadmill while the voice of a personal trainer coaches you and motivates you through every step of your workout. One iFIT Card is included. Additional iFIT Cards are available separately. To purchase iFIT Cards at any time, call the telephone number on the front cover of this manual.
HOW TO TURN ON THE POWER 1 2 Plug in the power cord (see page 11). Next, locate the on/off switch on the treadmill frame near the power cord. Make sure that the on/off switch is in the on position.
You can select an audio setting if desired. When you use an iFIT Card, a personal trainer will guide you through your workouts and instruct you how to purchase more iFIT Cards if “Instruction” is selected as your audio setting. If you select the “On” setting, your personal trainer will simply guide you through your iFIT workouts. If you select “Off,” you will hear no audio guidance during your workouts. To change the audio setting, first highlight AUDIO TRAINER and press the Heart Rate Control button.
5 HOW TO USE THE MANUAL MODE 1 To change the incline of the treadmill, press the Incline increase and decrease buttons or one of the numbered Quick Incline buttons. Each time one of the buttons is pressed, the incline will gradually increase until it reaches the selected incline setting. Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. 2 Personalize console settings if desired. 6 See HOW TO PERSONALIZE CONSOLE SETTINGS on page 13.
When the manual mode is selected, the console offers eight display modes. The display mode that you select will determine which workout information is shown. For example, the first display mode shows only the elapsed time and the distance that you have walked or run. Press the Display button repeatedly to select the desired display mode. 7 Measure your heart rate if desired. You can measure your heart rate using either the chest pulse sensor (see page 10) or the handgrip pulse sensor.
At the end of the first one-minute segment of the program, a series of tones will sound. If a different speed setting and/or incline setting is programmed for the second segment, the speed setting and/or incline setting will appear at the top of the display for a moment to alert you. The treadmill will then automatically adjust to the speed and incline settings for the second segment. HOW TO USE A PRESET PROGRAM 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 13.
If the speed or incline setting for the current segment is too high or too low, you can override the setting by pressing the Speed or Incline buttons; however, when the next segment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. 7 See step 8 on page 16. 8 To change the intensity level of the entire program, press the Intensity increase and decrease buttons. When you are finished exercising, remove the key from the console.
5 HOW TO CREATE A CUSTOM PROGRAM 1 When a custom program is selected, the console offers three display modes. Press the Display button repeatedly to select the desired display mode. Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. 2 To program a speed setting and an incline setting for the first one-minute segment of the program, simply adjust the speed and incline of the treadmill as desired by pressing the Speed and Incline buttons or the Intensity buttons.
5 HOW TO USE A CUSTOM PROGRAM 1 Insert the key into the console. The custom program will function in the same way as a preset program (see step 5 on pages 17 and 18). See HOW TO TURN ON THE POWER on page 13. 2 If desired, you can redefine the program while using it. To change the speed or incline setting for the current segment, simply press the Speed or Incline buttons or the Intensity buttons. When the current segment ends, the new setting will be saved in memory.
5 HOW TO USE A PULSE PROGRAM To adjust the maximum target heart rate setting, press the Heart Rate increase and decrease buttons (see EXERCISE INTENSITY on page 29). To adjust the target heart rate setting quickly, hold down one of the buttons. CAUTION: If you have heart problems, or if you are over 60 years of age and have been inactive, do not use the pulse programs. If you are taking medication regularly, consult your physician to find whether the medication will affect your exercise heart rate.
If the speed or incline setting for the current segment is too high or too low, you can override the setting by pressing the Speed or Incline buttons; however, when the console compares your heart rate to the current target heart rate setting, the speed or incline of the treadmill may automatically change. To stop the program at any time, press the Stop button. To restart the program, press the Start button. The walking belt will begin to move at 2 Km/H.
4 HOW TO USE AN IFIT CARD 1 A moment after the button is pressed, the treadmill will automatically adjust to the first speed and incline settings of the program. Hold the handrails and begin walking. Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. 2 5 Personalize console settings if desired. See HOW TO PERSONALIZE CONSOLE SETTINGS on page 13. 3 Press the Start button to start the program.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may become permanently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right.
HOW TO LOWER THE TREADMILL FOR USE Frame 1. Hold the upper end of the treadmill with your left hand. Pull the latch knob to the left and hold it. Pivot the frame downward and release the latch knob. Note: To release the latch knob, it may be necessary to push the frame forward as you pull the latch knob to the left. Latch Knob 2. Hold the metal frame firmly with both hands, and lower it to the floor.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see page 11). If an extension cord is needed, use only a 3-conductor, 1 mm2 (14-gauge) cord that is no longer than 1.5 m (5 ft.).
Next, locate the Reed Switch (14) and the Magnet (12) on the left side of the Pulley (11). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8". If necessary, loosen the indicated Screw (29), move the Reed Switch slightly, and then retighten the Screw. Then, reattach the hood, and run the treadmill for a few minutes to check for a correct speed reading.
PROBLEM: The incline of the treadmill does not change correctly SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system. PROBLEM: The chest pulse sensor does not function properly SOLUTION: a.
CONDITIONING GUIDELINES WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems. The pulse sensor is not a medical device. Various factors, including your movement, may affect the accuracy of heart rate readings. The sensor is intended only as an exercise aid in determining heart rate trends in general. The following guidelines will help you to plan your exercise program.
PART LIST—Model No. PETL61606.0 R1006A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 2 2 8 50 1 1 2 4 2 2 1 1 17 1 2 2 2 2 2 1 1 1 1 1 1 1 1 1 9 2 1 2 4 1 1 1 1 11 1 1 1 2 1 1 4 2 1 1 1 Description Key No. Qty.
Key No. Qty. 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 1 1 1 1 4 1 2 1 1 1 1 1 1 1 1 4 2 2 1 Description Handrail Latch Assembly Latch Warning Decal Circuit Breaker Console Clamp Screw Idler Arm Bolt Rear Roller Washer Incline/Controller Wire Incline Stop Bracket Stop Bracket Spacer Chest Pulse Strap Console Plate Chest Pulse Sensor Chest Pulse Receiver Lower Latch Bolt Handrail Cover Fastener Receiver Screw Console Clamp Upper Latch Bolt Key No. Qty.
2 57 59 38 58 4 105 52 56 3 62 101 29 53 61 1 54 3 56 52 53 105 4 42 60 29 6 3 61 38 51 62 7 104 8 48 23 9 4 1 47 26 4 3 3 22 25 4 18 10 3 17 28 38 79 21 27 16 30 50 42 69 11 12 20 14 29 4 19 15 3 29 38 41 68 10 55 69 8 117 7 3 4 33 32 2 34 31 9 33 118 55 55 33 36 4 4 35 13 43 13 4 18 100 46 15 29 102 98 37 38 17 38 97 119 108 113 44 107 24 106 4 49 45 5 4 To identify the parts shown on this
94 13 89 13 114 124 13 13 13 78 126 78 13 4 94 109 80 110 69 63 4 111 116 4 120 125 114 103 4 4 116 99 4 112 122 115 13 66 67 4 78 4 103 4 70 78 121 78 4 80 78 13 4 71 76 4 92 29 91 86 87 65 4 4 85 4 4 4 4 93 4 64 95 38 90 82 81 4 4 90 4 4 38 64 90 73 86 90 38 72 82 81 4 4 75 90 85 83 64 96 82 81 4 64 4 46 123 90 75 4 87 90 38 72 74 77 82 81 84 69 EXPLODED DRAWING—Model No. PETL61606.
ORDERING REPLACEMENT PARTS To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Customer Service Department Unit 4, Revie Road Industrial Estate Revie Road Beeston Leeds, LS118JG UK Tel: 08457 089 009 Outside the UK: (44) 0113 387 7133 Fax: (44) 0113 387 7125 To help us assist you, please be prepared to give the following information: • the MODEL NUMBER of the product (PETL61606.