User's Manual

13
H
OW TO TURN ON THE POWER
Plug in the power cord
(see page 11). Next,
l
ocate the on/off switch
on the treadmill frame
near the power cord.
Make sure that the
on/off switch is in the
on position.
Stand on the foot
rails of the tread-
mill. Find the clip
attached to the
key, and slide the
clip securely onto
the waistband of
your clothes. Next,
insert the key into the console. After a moment,
the display will light.
Important: In an emergency
situation, the key can be pulled from the con-
sole, causing the walking belt to slow to a
stop. Test the clip by carefully taking a few
steps backward; if the key is not pulled from
the console, adjust the position of the clip.
Note: To prevent damage to the walking platform,
wear clean athletic shoes while using the tread-
mill. The first time the treadmill is used, observe
the alignment of the walking belt, and center the
walking belt if necessary (see page 27).
H
OW TO PERSONALIZE CONSOLE SETTINGS
The console also features a settings mode that allows
y
ou to view your workout history, select a system of
measurement for the console, turn on and turn off the
d
emo mode, enter an audio trainer setting, adjust the
volume and contrast settings of the console, and turn
on and turn off the welcome screen.
Follow the steps below to personalize console settings.
Select the settings mode.
To select the settings mode, first remove the key
from the console. Then, hold down the Stop but-
ton while reinserting the key into the console.
When the settings mode is selected, the top of the
display will show the total number of hours that the
treadmill has been used and the total number of
miles or kilometers that the walking belt has
moved.
Below the workout history, the display will show
the word ENGLISH or METRIC to indicate which
system of measurement is selected. To change
the system of measurement, first highlight UNITS
by pressing the Heart Rate increase or decrease
button, and press the Heart Rate Control button.
Next, press the Heart Rate increase or decrease
button to select the desired system of measure-
ment. Then, press the Heart Rate Control button.
The display will also show the words DEMO
MODE and the current setting: OFF, LOGO,
ROAD, or PROGRAMS. The “demo mode” can be
used while the treadmill is displayed in a store.
While the demo mode is selected, the power cord
can be plugged in, the key can be removed from
the console, and the display will remain on. The
console buttons will not function. To select a
demo mode, highlight DEMO MODE and then
press the Heart Rate Control button. Next, press
the Heart Rate increase or decrease button to
highlight OFF (to turn off the demo mode), VISUAL
EQ (to display visual equalizer), ROAD (to display
an animation of a runner on a road), or PRO-
GRAMS (to display previews of various programs).
Then, press the Heart Rate Control button.
1
2
1
On
Position
Key
Clip