User's Manual

ManualsBrandsProForm ManualsFitness EquipmentProForm PETL616060 - 620 V TREADMILL

OW TO USE A PRESET PROGRAM

nsert the key into the console.

See HOW TO TURN ON THE POWER on page

13.

Personalize console settings if desired.

See HOW TO PERSONALIZE CONSOLE SET-

TINGS on page 13.

Select a preset program.

To select a preset program, press the Weight

Loss Programs button or the Aerobic Fitness

Programs button repeatedly.

When a preset program is selected, the display

will show the name of the program, the program

time, the maximum incline setting of the program,

and the maximum speed setting. In addition, a

profile of the speed settings of the program will

appear in the display.

Each preset program is divided into 30 one-

minute segments. One speed setting and one in-

cline setting are programmed for each segment.

Note: The same speed setting and/or incline set-

ting may be programmed for two or more consec-

utive segments.

Press the Start button to start the program.

A moment after the button is pressed, the tread-

mill will automatically adjust to the first speed and

incline settings of the program. Hold the handrails

and begin walking.

Select a display mode and monitor your

progress with the display.

When a preset program is selected, the console

offers three display modes. Press the Display but

ton repeatedly to select the desired display mode.

If the first or second display mode is selected, a

profile of the speed settings of the program will ap

pear in the display. A small arrow below the profile

will indicate your progress.

At the end of the first one-minute segment of the

program, a series of tones will sound. If a different

peed setting and/or incline setting is pro-

grammed for the second segment, the speed set-

ing and/or incline setting will appear at the top of

the display for a moment to alert you. The tread-

mill will then automatically adjust to the speed and

incline settings for the second segment.

The program will continue in this way until the

small arrow reaches the right end of the profile.

The walking belt will then slow to a stop.

If the third display mode is selected, the display

will show an animation of a runner.

At the end of the first one-minute segment of the

program, a series of tones will sound. If a different

speed setting is programmed for the second seg-

ment, the speed setting will move along the bot-

tom of the display to alert you. If a different incline

setting is programmed, the incline setting will ap-

pear at the top of the display for a moment. The

treadmill will then automatically adjust to the

speed and incline settings for the second seg-

ment.

The program will continue in this way until the last

segment ends. The walking belt will then slow to a

stop.