User's Manual

PROBLEM: The incline of the treadmill does not change correctly

OLUTION: a

. With the key in the console, press one of the Incline buttons.

hile the incline is changing, re-

move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the

aximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The chest pulse sensor does not function properly

SOLUTION: a. If the chest pulse sensor does not function properly, see CHEST PULSE SENSOR TROUBLE-

SHOOTING on page 10.

b. If the chest pulse sensor still does not function properly, the battery

should be changed. To replace the battery, first locate the battery

cover on the back of the sensor unit. Insert a coin into the slot in the

cover, and turn the cover counterclockwise to the “open” position.

Then, remove the cover.

Next, remove the old battery from the sensor unit, and insert a new

CR 2032 battery,

with the battery oriented so the writing is on

top. Make sure that the rubber gasket is in place in the sensor unit.

Then, reinsert the battery cover and turn it to the closed position.

Battery

Rubber

Gasket

Battery Cover

Battery

Cover