User's Manual

7
2. Identify the Left Upright (73) and the Right
Upright (74). Hold the Right Upright near the
R
ight Base Cover (77) as shown. Insert the
Upright Wire Harness (75) up through the rec-
t
angular hole in the bottom of the Right Upright
and out of the top of the Right Upright.
Gently pull up on the Upright Wire Harness (75)
as you set the Right Upright (74) on the Base
(83) inside the Right Base Cover (77). Be care-
ful not to pinch the Upright Wire Harness.
Attach the Right Upright (74) to the Base (83)
with two Upright Bolts (72) and two Star
Washers (90). Note: It may be necessary to tip
the top of the Right Upright forward slightly as
you thread the Upright Bolts into the Right
Upright.
Attach the Left Upright (73) to the Base (83) in
the same way. Note: There is not an upright wire
harness on the left side.
With the help of a second person, lower the
treadmill and discard the cardboard stand.
83
7
5
77
2
74
7
3
90
72
3. Identify the Right Upright Sleeve (96) and the
Left Upright Sleeve (95). Slide the Right Upright
Sleeve onto the Right Upright (74) and the Left
Upright Sleeve onto the Left Upright (73).
95
“Right”
“Left”
96
3
74
73