User's Manual

THE INFORMATION MODE/DEMO MODE

he console features an information mode that keeps

track of the total number of hours that the treadmill has

een operated and the total distance that the walking

belt has moved. The information mode also allows you

to select kilometres or miles as the unit of measure-

ment and to turn on and turn off the demo mode.

To select the information mode, hold down the Stop

button whilst inserting the key into the console, and

then release the Stop button. When the information

mode is selected, the following information will be

shown in the display:

The priority dis-

play will show the

total number of

kilometres (or

miles) that the

walking belt has

moved. The

lower right corner

of the display will

show the total number of hours that the treadmill has

been operated. In addition, an “M” for metric kilometres

or an “E” for English miles will appear in the lower left

corner of the display. Press the Speed + button to

change the unit of measurement if desired.

IMPORTANT: If a

“d” appears in the

ower left corner

of the display, the

onsole is in the

“demo” mode.

This mode is in-

tended to be used

only when a

treadmill is displayed in a store. When the console is in

the demo mode, the power cord can be plugged in, the

key can be removed from the console, and the indica-

tors in the display will automatically appear in a preset

sequence; the buttons on the console will not operate.

a “d” appears when the information mode is se-

lected, press the Speed – button so “d” disappears.

To exit the information mode, remove the key from the

console.