User's Manual

8. Orient the Crossbar (78) so that the indicated

bump is positioned as shown. Attach the

Crossbar to the Uprights (77, 79) with four 1/4" x

5/8" Bolts (7); do not fully tighten the Bolts

yet.

Bump

7. Hold a Bolt Spacer (84) inside the lower end of

the Left Upright (77). Insert a 3/8" x 4" Bolt (5)

with a 3/8" Star Washer (12) into the Left

Upright and the Bolt Spacer. Repeat this step

with a second Bolt Spacer (84), 3/8" x 4" Bolt

(5), and 3/8" Star Washer (12).

Hold the Left Upright Spacer (82) and the Left

Upright (77) against the Base (60). Tighten the

3/8" x 4" Bolts (5) until the heads of the Bolts

touch the Left Upright; do not fully tighten the

Bolts yet.

Press a Base Cap (85) into the Base (60). With

the help of a second person, tip the treadmill so

that the Base is flat on the floor.

6. With the help of a second person, carefully tip

the treadmill onto its right side. Partially fold the

Frame (53) so the treadmill is more stable; do

ot fully fold the Frame yet.

emove and discard the two indicated bolts (A)

and the shipping bracket (B).

Attach a Wheel (90) with the 3/8" x 2" Bolt (3)

and the 3/8" Locknut (11) that you removed in

step 1. Do not overtighten the Nut; the Wheel

must turn freely. Discard the shipping bracket.