Model No. PETL99819.0 Serial No. Write the serial number in the space above for reference. USER’S MANUAL Serial Number Decal CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 From Ireland: 053 92 36102 Website: iconsupport.eu E-mail: csuk@iconeurope.com Write: ICON Health & Fitness, Ltd. Unit 4, Westgate Court Silkwood Park OSSETT WF5 9TT UNITED KINGDOM AUSTRALIA Call: 1800 993 770 E-mail: australiacc@iconfitness.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 12.
frame securely in the storage position. Do not operate the treadmill while it is folded. 21. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 26. Do not change the incline of the treadmill by placing objects under the treadmill. 22. The heart rate monitor is not a medical device. Various factors, including the user’s movement, may affect the accuracy of heart rate readings.
BEFORE YOU BEGIN Thank you for selecting the new PROFORM® PERFORMANCE 800I treadmill. The PERFORMANCE 800I treadmill provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is preattached. Extra parts may be included.
ASSEMBLY • Assembly requires two persons. • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Assembly requires the following tools: the included hex keys • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal.
2. Make sure that the power cord is unplugged. 2 80 A Remove the tie securing the Upright Wire (80) to the front of the Base (88). Next, identify the Right Upright (79). Have a second person hold the Right Upright near the Base (88). 80 79 See the inset drawing. Tie the wire tie (A) in the Right Upright (79) securely around the end of the Upright Wire (80). Then, insert the Upright Wire into the lower end of the Right Upright as you pull the other end of the wire tie through the Right Upright.
4. Set the Right Upright (79) on the Base (88) as shown. Make sure not to pinch the Upright Wire (80). Then, slide the Right Upright so that the 3/8" x 2 3/8" Screw (2) in the Base is inserted into the slot in the Right Upright. Do not tighten the Screw yet. 4 80 Slot 2 79 88 5. Attach the Right Upright (79) to the Base (88) with a 3/8" x 2 3/8" Screw (2), a 3/8" x 1 1/4" Screw (3), a 3/8" x 1 1/2" Screw (4), and three 3/8" Star Washers (6) as shown; do not fully tighten the Screws yet.
6. Remove and save the four indicated 5/16" x 3/4" Screws (13). 6 13 Identify the Left and Right Base Covers (94, 95). Slide the Left Base Cover onto the Left Upright (78), and slide the Right Base Cover onto the Right Upright (79). Do not press the Base Covers into place yet. 78 13 94 79 95 7. Attach a Handrail (72) to the Right Upright (79) with two 5/16" x 2" Screws (5) and two 5/16" Star Washers (7); start both Screws, and then tighten them. Make sure not to pinch the Upright Wire (80).
9. Set the Console Base (97) face down on a soft surface to avoid scratching the Console Base. 9 10 86 10 Remove and discard the two indicated screws (F). Then, remove the Pulse Crossbar (75). 10 Next, identify the Left and Right Trays (85, 86). Attach the Trays to the Console Base (97) with eight #8 x 1/2" Screws (10); do not overtighten the Screws. 85 10 13 Then, remove and save the four indicated 5/16" x 3/4" Screws (13). F 75 F 10.
11. With the help of a second person, hold the console assembly (G) near the Handrails (72). 11 G Connect the ground wires (H) from the console assembly (G) to the Console Ground Wires (76) on the Pulse Crossbar (75). Next, insert the Upright Wire (80) through the two indicated looped ties (I). J See the inset drawing. Connect the Upright Wire (80) to the console wire (J). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again.
. Attach the Pulse Crossbar (75) to the console assembly (G) with four #8 x 3/4" Screws (11); start all four Screws, and then tighten them. Do not overtighten the Screws. 13 G Firmly tighten the four 5/16" x 3/4" Screws (13). 75 13 13 11 11 14. Set the Left Handrail Cover (70) on the left Handrail (72). Start two #8 x 3/4" Screws (11) into the left Handrail and the Left Handrail Cover. Next, slide the Left Handrail Cover forward against the console assembly (G) as shown. Then, tighten both Screws.
15. Raise the Frame (54) to the upright position. Have a second person hold the Frame until step 17 is completed. 15 Remove the two 5/16" x 3/4" Screws (13) from the Latch Crossbar (51). L Next, orient the Latch Crossbar (51) as shown. Make sure that the “This side toward belt” sticker (K) is facing the treadmill. Attach the Latch Crossbar to the brackets (L) on the Frame (54) with the two 5/16" x 3/4" Screws (13) that you just removed and two 5/16" Star Washers (7). 51 L 7 13 7 13 54 16.
17. Remove the 5/16" Nut (14) and the 5/16" x 2 1/4" Bolt (26) from the bracket on the Latch Crossbar (51). 17 14 N 51 26 Align the upper end of the Storage Latch (52) with the bracket on the Latch Crossbar (51), and insert the 5/16" x 2 1/4" Bolt (26) through the bracket and the Storage Latch. This will push a spacer (N) out of the Storage Latch; discard the spacer. 52 54 Next, tighten the 5/16" Nut (14) onto the 5/16" x 2 1/4" Bolt (26).
19. Firmly tighten the three Screws (2, 3, 4) on each side of the treadmill, and press the Base Covers (94, 95) into place. 19 2, 3, 4 94 95 2, 3, 4 20. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight.
HOW TO USE THE TREADMILL HOW TO PLUG IN THE POWER CORD Follow the steps below to plug in the power cord. This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product’s power cord has an equipment-earthing conductor and an earthing plug. IMPORTANT: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord. 1.
CONSOLE DIAGRAM FEATURES OF THE CONSOLE In addition, the console features a selection of workouts. Each workout automatically controls the speed and incline of the treadmill as it guides you through an effective exercise session. The advanced treadmill console offers a selection of features designed to make your workouts more effective and enjoyable. You can even listen to your favorite workout music or audio books with the console’s sound system while you exercise.
HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components. The console features a tablet with a full-color touch screen. The following information will help you become familiar with the tablet’s advanced technology: Plug in the power cord (see page 17).
HOW TO SET UP THE CONSOLE 6. Calibrate the incline system. Before using the treadmill for the first time, set up the console. First, touch your name on the screen. Next, select the settings main menu. Then, select the maintenance section, touch the Calibrate Incline button, and then touch the Begin button to calibrate the incline system. See step 4 on page 27 for more information. 1. Connect to your wireless network.
HOW TO USE THE MANUAL MODE 4. Change the incline of the treadmill as desired. 1. Insert the key into the console. To change the incline of the treadmill, press the incline increase and decrease buttons or one of the numbered incline buttons. Each time you press one of the buttons, the incline will gradually change until it reaches the selected incline setting. See HOW TO TURN ON THE POWER on page 19. Note: It may take some time for the console to be ready for use. 2. Select the main menu.
• Your pace To measure your heart rate, stand on the foot rails and hold the contacts with your palms for approximately ten seconds; avoid moving your hands. When your pulse is detected, your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. • The speed of the walking belt • The average speed of the walking belt • A track representing 400 m (1/4 mile) If desired, adjust the volume by pressing the volume buttons on the console. 7.
HOW TO USE A MAP WORKOUT 5. Monitor your progress with the display modes. Note: To use a map workout, the console must be connected to a wireless network (see HOW TO USE THE WIRELESS NETWORK MODE on page 27). See step 5 on page 21. 6. Measure your heart rate if desired. 1. Insert the key into the console. See step 6 on page 22. See HOW TO TURN ON THE POWER on page 19. 7. Turn on the fan if desired. See step 7 on page 22. 2. Select the main menu or the workout library. 8.
HOW TO USE A DISTANCE OR TIME WORKOUT If you make a mistake, you can use the Undo button on the left side of the screen. Note: To use a distance or time workout, the console must be connected to a wireless network (see HOW TO USE THE WIRELESS NETWORK MODE on page 27). An iFit account is also required. The screen will display the elevation and distance statistics for your workout. If desired, you can change the default speed. 1. Add workouts to your schedule on iFit.com. 4. Save your workout.
HOW TO USE THE WORKOUT SETTINGS SECTION 5. Select a distance or time workout that you have previously added to your schedule on iFit.com. 1. Select the settings main menu. Touch the calendar icon to download a distance or time workout from your schedule. Insert the key into the console (see HOW TO TURN ON THE POWER on page 19). Then, touch your name on the screen, and touch the gears button to select the settings main menu. Note: Before workouts will download, you must add them to your schedule on iFit.
HOW TO USE THE MAINTENANCE SECTION HOW TO USE THE EQUIPMENT SETTINGS SECTION 1. Select the settings main menu. 1. Select the settings main menu. See step 1 on page 25. See step 1 on page 25. 2. Select the maintenance section. 2. Select the equipment settings section. In the settings main menu, scroll to the Maintenance section. In the settings main menu, scroll to the Equipment Settings section. Note: Slide or flick the screen to scroll up or down through the options if necessary. 3.
HOW TO USE THE WIRELESS NETWORK MODE 4. Calibrate the incline system of the treadmill. The console features a wireless network mode that allows you to set up a wireless network connection. Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline system. The treadmill will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system.
When the console is connected to your wireless network, a checkmark will appear next to the wireless network name. Then, touch the back button on the screen to return to the wireless network mode. THE OPTIONAL CHEST HEART RATE MONITOR Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the best results is to maintain the proper heart rate during your workouts.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline to zero before you fold the treadmill. Then, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the storage latch is in the locked position. Moving the treadmill may require two people. 1.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE SYMPTOM: The power turns off during use Regular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten all parts each time the treadmill is used. Replace any worn parts immediately. a. Check the power switch (see drawing c at the left). If the switch has tripped, wait for five minutes and then press the switch back in. b. Make sure that the power cord is plugged in.
Next, locate the Reed Switch (100) and the Magnet (102) on the left side of the Pulley (46). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If necessary, loosen the #8 x 3/4" Truss Head Screw (18), move the Reed Switch slightly, and then retighten the Screw. Reattach the Motor Hood (see page 30), and walk on the treadmill for a few minutes to check for a correct speed reading.
d. If the walking belt still slows when walked on, see the front cover of this manual. SYMPTOM: The walking belt slips when walked on a. First, remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 4 4 2 2 4 6 14 4 4 8 45 4 10 2 3 2 2 21 16 1 1 2 4 1 4 1 5 6 14 2 1 2 4 1 3 10 2 1 1 4 1 1 1 1 2 1 2 2 1 4 Model No. PETL99819.0 R0719A Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 1 1 2 2 3 1 Description Key No. Qty. Clamp Magnet 5/16" Washer Motor Bushing #8 Nut Controller Clamp 107 108 109 110 111 * 3 1 1 1 1 – Description #8 x 1/2" Machine Screw Filter Motor Isolator Ferrite Clamp Receptacle User’s Manual Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated.
18 19 15 36 93 40 92 25 42 29 19 11 18 56 29 19 15 18 19 7 13 41 29 33 93 40 92 18 19 11 36 25 43 19 55 14 29 44 45 29 33 38 33 29 19 26 19 19 23 47 25 29 36 100 93 40 7 13 18 92 39 27 48 17 53 52 29 54 19 33 46 102 18 101 89 40 93 14 19 18 92 29 34 25 24 23 105 36 109 51 50 45 29 19 15 103 22 104 49 47 27 27 17 48 107 108 106 27 30 107 107 EXPLODED DRAWING A Model No. PETL99819.
EXPLODED DRAWING B Model No. PETL99819.
EXPLODED DRAWING C Model No. PETL99819.
EXPLODED DRAWING D Model No. PETL99819.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.
