User's Manual

6
1.
Attach the Left Frame (1) to the Seat Frame
(
3) with four M10 x 55mm Bolts (16), four M10
W
ashers (22), and four M10 Nylon Locknuts
(24).
Do not tighten the Nylon Locknuts yet.
Attach the Right Frame (2) to the Seat
Frame in the same way.
Tighten the Backrest Knob (15) into the Seat
Frame (3).
1
To make assembly easier, read the infor-
mation on page 5 and use the PART
I
DENTIFICATION CHART on page 5.
1
24
2
3
2. Attach the Foot Plate (10) to the Left and Right
Frames (2, 3) with four M5 x 15mm Screws
(21).
See step 1 and tighten the M10 Nylon
Locknuts (24).
2
10
2
3. Attach the two Backrest Frames (5) to the
Backrest Bracket (4) with four M10 x 45mm
Bolts (18), four M10 Washers (22), and four
M10 Nylon Locknuts (24). Do not tighten the
Nylon Locknuts yet.
3
5
4
18
16
24
15
22
22
21
21
3
18
5
22
22
24
24