Use and Care Manual

14
16
61
68
29
93
95
I
16. Identify the Right and Left Seat Handlebars
(29, 93).
Slide the Right Seat Handlebar (29) onto the
right side of the Seat Frame (61).
Attach the Right Seat Handlebar (29) with two
M8 x 38mm Bolts (95) and two M8 Locknuts
(68); make sure that the Locknuts are in the
hexagonal holes (I).
Repeat this step to attach the Left Seat
Handlebar (93).
15
102
7
8
78
68
68
15. Identify the Right Upper Body Arm (7).
Orient an Upper Body Cover (78) as shown,
and slide it upward onto the Right Upper Body
Arm (7).
Attach the Right Upper Body Arm (7) to the Right
Pivot Leg (8) with three M8 x 38mm Hex Bolts
(102) and three M8 Locknuts (68); start all the
Hex Bolts, and then tighten them. Make sure
that the Locknuts are inside the hexagonal
holes (H).
Then, slide the Upper Body Cover (78)
downward onto the Right Pivot Leg (8).
Repeat this step on the other side of the
hybrid trainer.
H