User's Manual

15. Orient the Front Upright Cover (25) as shown.

Attach the Front Upright Cover (25) around the

Upright (5) by pressing it into the Rear Upright

Cover (24).

14. Tip: Avoid pinching the wires. Attach the Rear

Upright Cover (24) to the Upright (5) with four M4

x 16mm Screws (93). Tip: It may be necessary

to bend the upper end of the Rear Upright

Cover gently into place around the Upright.

Avoid pinching

the wires

13. With the help of a second person, place some of

the packaging materials (not shown) under the

rear of the Frame (1). Have the second person

hold the Frame to prevent it from tipping

while you complete this step.

Tighten the Leveling Foot (41) into the underside

of the Frame (1).